Paging Amplifier Setup - CyberData 011085 Operation Manual

2.2 Paging Amplifier Setup

Set up and configure each Paging Amplifier before you mount it.
CyberData delivers each Paging Amplifier with the factory default values indicated in
Table
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
Operations Guide
2-2:
Table 2-2. Factory Default Settings—Default of Network
Parameter
a
a
a
a. Default if there is not a DHCP server present.
DHCP
10.10.10.10
admin
admin
255.0.0.0
10.0.0.1
930363H
Installing the VoIP V2 Paging Amplifier
Paging Amplifier Setup
Factory Default Setting
CyberData Corporation
6