CyberData 011085 Operation Manual page 29

4. Click Submit.
Note
Note
Table 2-11
Operations Guide
Do not reboot the board after pressing the Submit button.
This starts the update process. Once the Paging Amplifier has updated the file, the
Firmware countdown page appears, indicating that the firmware is being written to flash.
The Paging Amplifier will automatically reboot when the upload is complete. When the
countdown finishes, the Upgrade Firmware page will refresh. The updated firmware
filename should be displayed in the system configuration (indicating a successful update
and reboot).
shows the web page items on the Upgrade Firmware page.
Table 2-11. Firmware Upgrade Parameters
Web Page Item Description
File Upload
Firmware Version Shows the current firmware version.
Use the Browse button to navigate to the location of the
firmware file that you want to upload.
Click on the Submit button to automatically upload the selected
firmware and reboot the system.
930363H
Installing the VoIP V2 Paging Amplifier
Configure the Paging Amplifier Parameters
CyberData Corporation
22