Identifying And Testing A Paging Amplifier When Using Informacast 4.0 Or Later - CyberData 11085 Operation Manual

Singlewire-enabled voip v2 paging amplifier

Hide thumbs Also See for 11085:

Table of Contents

2.4 Identifying and Testing a Paging Amplifier when Using

InformaCast 4.0 or Later

This section describes the basic process for identifying and testing the CyberData Paging Amplifier

when using Singlewire's InformaCast software version 4.0 or later.

Note

To add the Paging Amplifier to the InformaCast server:

1. Click Edit IP Speakers on the Main Screen of the Singlewire Informacast Server Web

Interface.

Operations Guide

Identifying and Testing a Paging Amplifier when Using InformaCast 4.0 or Later

If you have questions or need help, please consult your InformaCast documentation and or

contact the CyberData support team.

CyberData's support is limited to IP endpoint functionality when used with an InformaCast

system.

Figure 2-19. Main Screen of the Singlewire InformaCast Server Web Interface

930363B

Installing the VoIP V2 Paging Amplifier

Edit IP Speakers

CyberData Corporation

Table of Contents

Do you have a question about the 11085 and is the answer not in the manual?

Voip v2