Guidelines And Manufacturer's Statement - Electromagnetic Emissions - Primedic DefiMonitor XD Series Operating Manual

A4
TM
The PRIMEDIC DefiMonitor is intended for use in the electromagnetic environment specified below.
The customer or the user of the PRIMEDIC
ronment.
Emissions test
FR emissions
CISPR 11
FR emissions
CISPR 11
FR emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctua-
tions /
flicker emissions
IEC 61000-3-3
RF emissions
CISPR 14 – 1
RF emissions
CISPR 15
HF-Aussendungen
nach CISPR 14-1
21324 / 09.05 / 02 / GB
DefiMonitor XD
Guidelines And Manufacturer's Statement – Electromagnetic
Emissions –
TM DefiMonitor should assure that it is used in such an envi-
Compliance
The PRIMEDIC
internal function. Therefore, its RF emissions are very
Group 1
low and are not likely to cause any interference in
nearby electronic equipment.
The PRIMEDIC
Group 2 energy in order to perform its intended function. Nearby
electronic equipment may be affected.
Class [A or B ]
[Class A, B, C,
D, or
not applicable]
[Complies or
Not applica-
ble]
[See 6.8.3.201 The PRIMEDIC
a) 3) establishments, including domestic establishments and those di-
and Figure rectly connected to the public low-voltage power supply network
201] that supplies buildings used for domestic purposes.
The PRIMEDIC
[See 6.8.3.201
establishments other than domestic and those directly
a)3) and Fig-
connected to the public-voltage power supply
ure 201]
network that supplies buildings used for domestic purposes.
The PRIMEDIC
Complies
with other equipment.
The PRIMEDIC
Complies
with other equipment.
Electromagnetic environment - guidance
TM DefiMonitor uses RF energy only for its
TM DefiMonitor must emit electromagnetic
TM DefiMonitor is suitable for use in all
TM
DefiMonitor is suitable for use in all
TM
DefiMonitor is not suitable for interconnection
TM DefiMonitor is not suitable for interconnection
Operating Manual
63