Air Duct Replacement - Inspur NF5266M6 User Manual

To install the super-capacitor:
1. Take the new super-capacitor out from the antistatic bag and position it in
place.
2. Secure the super-capacitor in place with velcro.
Figure 4-5 Installing the Super-Capacitor
3. Connect the cable of the super-capacitor.
4. Install the access panel.
4.4.3

Air Duct Replacement

For proper cooling, do not operate the server without the access panel, air ducts,
expansion slot covers, or blanks installed. If the server supports hot-swap
components, minimize the amount of time the access panel is open.
To remove the air duct:
1. Remove the access panel.
2. Remove the super-capacitor on the air duct.
3. Lift up the air duct as indicated by the arrow to remove it from the server.
24