Table of Contents
Advertisement
12
Monitoring via the Web Browser
12.1
Alarms
This selection provides the status of the base alarms by indicating if an alarm has been triggered. Under the State
column, the status will appear in red if an alarm has been activated. The status will be displayed in green when the
alarm condition is not present.
Click on Alarms in the Monitor menu to see if any base alarms have been triggered.
ID
Description
State
12.2
Controls
Use the following rules to operate the NetGuardian's control:
1.
Select Controls from the Monitor menu.
2. Under the State field, you can see the current condition of the control.
3. To issue the control, click on a command (OPR - operate, RLS - release, or MOM - momentary)
Basic Alarm Monitoring
Alarm ID number.
User-definable description for the discrete alarm point.
The current state of the alarm. (Clear or Alarm)
55
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian 16A and is the answer not in the manual?
Questions and answers