DPS Telecom NetGuardian 16A User Manual page 40

36
Password
Confirm Password
Check all
Edit logon profiles
Write Config (change
unit configuration)
View monitor pages
Send relay commands Allows the user to send commands to operate the device's control relays.
TTY access (access via
Craft port or via Telnet)
Initialize config to
factory defaults
Upload new firmware
or config
Get audit log
Purge (delete) audit log Allows the user to deletes the existing audit log.
Get (backup) config
Get and delete analog
history
Once you've finished configuring a profile, click Save to store your changes locally.
To access another profile, simply click Go to profiles summary at the bottom of the page. You may also navigate
away from the user profiles screen at any time by clicking any of the menu options on the left side of the screen.
User Profile
Enter a unique user password Note: All passwords are AES 128 encrypted.
Re-enter the password.
Access Rights
Enables all Access Rights
Enables the user to add/modify user profiles and password information.
Enables the user to change the unit config by accessing the Write feature in the
control menu.
Allows the user to access Monitor menu options.
Grants the user access to the unit via TTY interface (via craft or telnet).
Allows the user to use the Initialize option in the Device Access menu, resetting the
NetGuardian to factory default settings. All user settings will be lost.
Allows the user to upload firmware or backed-up configuration files.
Allows the user to access the Audit Log (Get Log command).
Backs-up all user profile configuration settings.
Allows the user to access and delete the analog and sensor history.
User profile field descriptions