How To Send Snmp Traps - DPS Telecom NetGuardian 16A User Manual

10.2

How to Send SNMP Traps

1. Click on the SNMP button in the Provisioning menu. Enter the SNMP GET and SNMP SET community strings
for your network, then click Save. The typical SNMP SET and GET community strings for network devices is
"public". As an added security measure, we've made our default "dps_public".
2. Click on the Notifications button in the Provisioning menu. You can setup as many as 8 different notifications.
Begin the setup "wizard" by clicking Edit for a notification number. In this example, we'll setup Notification 4 to send
SNMP traps to your alarm master.
3. At the Notification Setting screen, use the drop down box to set what events to use for this notification. Now,
select the Send SNMP Notification button and click Next.
4. At the SNMP Notification screen, you'll enter your network's SNMP settings. Enter the IP address of your
SNMP Trap Server. Enter the Trap Port Number (usually 162) and the Trap Community password. Click Save
and Next.
31