NEW BRUNSWICK SCIENTIFIC BioFlo 110 Manual To Operations page 72

•
TEMPERATURE
•
HEATER CONNECTOR
HEATER/WATER JACKET
CONNECTOR
ROTAMETER
(mount on
either side)
Note the following features and connections on the side of the Power Controller:
•
ROTAMETER
•
WATER INLET &
OUTLET
New Brunswick Scientific
Connection for RTD temperature probe, to sense
temperature inside the vessel.
Connection for the heat blanket (non-jacketed vessels) or
for the jacket water heater (water-jacketed vessels).
Figure 35: Power Controller Front Panel
POWER SWITCH
I = on / O = off
Can be mounted on either side. Manually adjusted
rotameter regulates the flow of air/gases into the vessel.
Via the water solenoid valve, located on the side panel,
which provides the connection between the water supply
and the vessel water inlet (either cooling coil or water
jacket). Inlet is marked 1 and outlet 2.
TEMPERATURE
OPERATING
LIGHT
59
RTD
TEMPERATURE
SENSOR
MOTOR
DRIVE
CABLE
GUIDE
(mount on
either side)
User's Guide