Basic Settings; Connection / Transformer - Siemens SICAM P 7KG7750 Manual

5

5.5 Basic Settings

5.5 Basic Settings
This dialog allows you to set the network type, the measuring range and the transformer ratio
(optionally).
5.5.1

Connection / Transformer

In order to adapt the SICAM P to the network to be measured, enter the network properties and
the parameters for the current and voltage measurement inputs.
Network type
Select the relevant network type.
•
Single-phase
•
Three-wire three-phase balanced
•
Three-wire three-phase unbalanced (2 current inputs ' Aron circuit)
•
Three-wire three-phase unbalanced (3 current inputs)
•
Three-phase four-wire balanced
•
Three-phase four-wire, unbalanced
86
Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013