Connection Examples; General; Single-Phase - Siemens SICAM P 7KG7750 Manual

1
1.6 Interface and Terminals
1.6.4

Connection Examples

1.6.4.1 General

The following are examples of current and voltage input connections (according to DIN 43807).
The device can be connected without current or voltage transformers as long as the maximum
voltage and current ratings of the device are not exceeded.
The voltage transformers can be connected in wye or open-delta configurations.
All input and/or output terminals not required for a particular input voltage and current configura-
tion are not used.
Note
The single ground connection of the instrument transformers is shown for illustration only. Actual
grounds must be installed directly at each instrument transformer.

1.6.4.2 Single-phase

a
N
26
S1 S2
PE
P1 P2
10 A
Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013