4.4.3.1 Screen for Energy Pulses
Energy
Selection of an energy or other metered quantity from the table 3-1 (depends on the type of the
input connection).
Value
Selection of the amount of energy required to generate a pulse.
Puls length
Can be selected from 50 ms, 100 ms, 150 ms, 200 ms to 500 ms
Note
An explanation on power metering can be found in chapter 5.7.2.
4.4.3.2 Screen for Limit Values
The values entered for hysteresis, pulse length and filter time are valid for all logically connected
measured quantities.
Hysteresis
•
Input of 0.1 % to 10 % of rated value
•
Percentage refers to nominal values
Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
energy pulses
*energy: WpL1 d
*value: 0.0088kWh/Imp
*pulse length:200ms
<ok
<cancel
limit value
*hysteresis:
*pulse length:
*filter time:
>further settings
<ok
<cancel
4.4 Basic Settings
.
1.0%
1 s
1.0s
4
65