Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Reference Manual page 92

Advanced
Simple Network Management Protocol
3. Set the Trusted Peer. This is the IP address and subnet that identifies which remote
management stations are allowed to perform SNMP operation on the Adit.
Field
Any Address
Specify an IP Address
Specify a Subnet
4. Enable the SNMP Traps, if desired. Traps are messages sent by the Adit to a remote
management station notifying the manager about important events or serious conditions. When
SNMP traps are enabled, the fields expand.
Field
Enable
Version
Destination
Community
2-56
Definition
No restriction to remote access.
Requires an IP address.
Requires an IP address and Subnet.
Definition
Check to enable the SNMP traps.
SNMP v1- SNMP version 1
SNMP v2c - SNMP version 2C
Enter the Destination IP address.
Enter a community string (a password that allows access to a network device).
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI