Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Reference Manual page 79

3. Set the following fields:
Field
Name
Destination
Netmask
Gateway
Metric
4. Select OK.
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Definition
Select a name from the Pulldown menu.
This is the destination host, subnet address, network address, or
default route. The destination for a default route is 0.0.0.0
The Network mask is used in conjunction with the destination to
determine when a route is used.
Enter the gateway IP address.
A measurement of the preference of a route. Typically, the lowest
metric is the most preferred route. If multiple routes exist to a given
destination network, the route with the lowest metric is used.
Advanced
Routing
2-43