Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Reference Manual page 211

Field
Proxy Servers
Proxy Type
Route Direct Phone
Entries in Phone
book through Proxy
Enabled/Disable
Use SIP Proxy
Port
Use SIP Outbound
Proxy
Port
Codecs
Supported Codecs
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Definition (Continued)
This drop-down menu allows users to select the proxy type:
Generic
BroadSoft (Info)
Sylantro
Lucent (Info)
Select the checkbox to enable.
Enable or disable the features listed below.
Select to enable, and enter the IP/DNS address of the SIP Proxy.
Enter SIP Proxy port where SIP requests are to be sent. Range is
1024-65535, with a default of 5060.
Select to enable, and enter the IP address of the SIP Outbound Proxy. An
outbound proxy is one to which all outgoing SIP requests are sent.
Enter SIP Outbound Proxy port. Range is 1024-65535, default of 5060.
Allows the user to select which codecs are to be enabled and provides a
drop-down menu to select the packetization time (ms):
G.711, 64kbps, u-Law = 10, 20, 30, 40, 50 or 60 (default is 20)
G.711, 64kbps, A-Law = 10, 20, 30, 40, 50 or 60 (default is 20)
G.729, 8kbps = 10, 20, 30, 40, 50, 60, 70 or 80 (default is 20)
Voice over IP
IP Telephony
6-5