Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Reference Manual page 240

Voice over IP
Trunk Monitoring
The following table defines the fields displayed in the Trunk Monitoring window:
Field
PRI Interface - For each PRI interface the following is displayed:
LapdStatus
Sabme
Frmr
TotalIncomingCalls
CompletedIncomingCalls
TotalOutgoingCalls
CompletedOutgoingCalls
Channel
Channel Status
RTP RX/TX/Lost (Packets)
Jitter (ms)
Overflow
6-34
Definition
The operational status of the LAPD (Link Access Procedure on the D
channel) status. (Inactive, Layer1Active, Layer2Active.
The number of peer SABME (Asynchronous Balanced Mode
Extended) frames received on this interface.
The number of LAPD FRMR (Frame Reject status) response frames
received. This is the number of framing errors on this interface.
Displays the number of Incoming Calls
Displays the number of Incoming Connected Calls
Displays the number of Outgoing Calls
Displays the number of Outgoing Connected Calls
The ID of the PRI (bearer) channel.
Displays the channel (bearer) status - unassigned, inactive, idle, busy.
Packets received/transmitted/dropped.
Milliseconds of Jitter incurred on the call.
Displays the overflow when there are too many packets to buffer.
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI