Table of Contents
Advertisement
Field
Phone Book
Destination
Proxy
Local Line
Direct Call
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Definition
Enter the Speed Dial number. Range is 3-10 digits. This is the number
that needs to be dialed to get to this entry. Digits allowed 0-9, #, *, ?, $.
Phone destination is used to identify the destination of the incoming
phone call. The options below are selected from the pulldown menu.
Will send INVITE to defined SIP Proxy from IP Telephony tab. Call-
setup information is routed through the proxy.
Number Manipulation
Strip/Prefix - Modifies the window to display Strip and Prefix fields.
Strip - The number of digits to be stripped off from the left-most
digits in the phone number. Possible usages include stripping off
the area code, or the 3-digit office prefix. Range is 0 - 7, with a
default of 0.
Prefix - The digits or name to be added to the phone number after
the stripping process has been applied. This field is empty by
default.
User ID - Enter a User ID with a maximum of 20 characters.
Will send an INVITE to a local line. Call-setup information does not
leave the system.
Line - Select the line from the pulldown menu.
Will send an INVITE to the User ID and IP address supplied in the
Speed Dial configuration for this entry. Call-setup information is sent
directly to the IP configured, without using a proxy.
IP Address or Host Name - Enter an IP Address or Host Name
destination.
Number Manipulation
Strip/Prefix - Modifies the window to display Strip and Prefix fields.
Strip - The number of digits to be stripped off from the left-most
digits in the phone number. Possible usages include stripping off
the area code, or the 3-digit office prefix. Range is 0 - 7, with a
default of 0.
Prefix - The digits or name to be added to the phone number after
the stripping process has been applied. This field is empty by
default.
User ID - Enter a User ID with a maximum of 20 characters.
Voice over IP
Phone Book
6-21
Advertisement
Table of Contents
