Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Reference Manual page 109

3. Configure the port as needed.
Field
Enable VLAN (dot1q)
tagging
Enable VLAN protocol
filtering
PVID
Priority
4. Select OK to save changes.
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Definition
This checkbox enables VLAN tagging on this port. Default is disabled
(unchecked).
This checkbox enables frame filtering on this port. Default is disabled
(the frame will go through the normal forwarding/bridging process).
Port VLAN ID.
VLAN priority setting. Range is 0-7 (0-2 = low, 3-6 = medium, 7 = high)
Advanced
VLAN Configuration
2-73