Security
Access Control
Field
5. Select OK to save. The newly created service port is listed in the table.
6. Select OK to save the User-Defined Service. The new service is listed (with a checkbox) in the
table.
4-12
Definition (Continued)
AH - Authentication Header Protocol. A protocol used in IPSec that authenticates a
packet IP header and payload (content). If a packet is modified during transmission,
the recipient is notified.
Other - Covers protocols not listed above. This option requires a Protocol Number
to be entered. Range is 0- 65535.
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI