Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Reference Manual page 224

Voice over IP
Phone Settings
Field
Signaling
Protocol
Calling Party Disconnect
(CPD)
Calling Features
Call Waiting
Call Waiting Caller ID
Block Outgoing Caller ID Enables/disables blocking of Caller ID on SIP calls made from this
Authentication
Authentication
Authentication User ID
Authentication Password
Logging
Per Line Logging
Notes
6-18
Definition (Continued)
Select the analog signaling mechanism:
Loop Start - Sets the line to Loop Start signaling.
Ground Start - Sets the line to Ground Start signaling.
Note: For the MSR, this field is not selectable. The setting is based
on the cross-connect type info.
Enables/disables Calling Party Disconnect capability for this line. If
enabled, causes a timed Open Switching Interval (OSI) to be applied
to the FXS loop when the remote (SIP) party disconnects.
Enables/disables the Call Waiting capability for this line.
Enables/disables the Call Waiting Caller ID for this line.
line.
Select to enable Authentication on the line.
The User ID to be used when responding to authentication requests.
Default is the User ID of the line.
The password to be used when responding to authentication requests.
Use the checkbox to enable per line logging. Default is unchecked.
Displays information regarding the current tab.
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI