Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Reference Manual page 149

4. Select the Remote Address and Subnet types, and select Next >.
Note: The following example assumes a selection of Network-to-Network/Remote Gateway
Address and Remote Subnet. This example displays the most options.
5. Configure the IPSec connection properties:
Field
6. Select Next >.
7. Select
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Remote Tunnel Endpoint Address
Remote Subnet
Shared Secret
Finish.
Definition
Enter the Remote Server IP Address.
Remote Subnet IP Address - Enter the remote subnet
IP Address
Remote Subnet Mask - Enter the subnet mask for the
above subnet address.
Enter a shared secret key, with a maximum of 30
characters.
Network Connections
New Connection
3-39