Table of Contents
Advertisement
Field
Digit Map
Per Trunk Digit Map
New Entry - See Call Destination window below.
Line
Destination
Strip
Prefix
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Definition (Continued)
Disabled - Use the phone book, maximum digits, or dialing timeout to
determine end of dialing. Default.
Default Digit Map - Pass dialed number as a complete number for
routing to the phone book, or to the proxy if there are no9 phone book
entries.
Custom Digit Map - Process as for the default digit map.
Note: The field name is a link to the Digit Map configuration window.
See Configuring the Digit Map on page 6-6.
Number (1-30) for the dial pattern.
Identifies the destination of the incoming phone call.
The number of digits to be stripped off from the left-most digits in the
phone number. Possible usages include stripping off the area code, or
the 3-digit office prefix.
Range is 0 - 7, with a default of 0.
The digits or a name to be added to the phone number after the
stripping process has been applied. This field is empty by default.
Voice over IP
Trunk Settings
6-29
Advertisement
Table of Contents
