Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Reference Manual page 129

The following are field definitions for the Configure Multilink 1 window:
Field
General
Device Name
Status
Schedule Availability
Network
Connection Type
MTU
Underlying Device
PPP
QOS Interleaving
Link Fragmentation
PPP Authentication
Login User Name
Login Password
PPP Encryption
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Definition
Displays the device name.
Displays the current status.
Defines when the WAN is available. The default is Always. To create a
Schedule Availability rule, click New.
Defines the network type:
WAN - Wide Area Network (Default).
LAN - Local Area Network
DMZ - Demilitarized Zone
Displays the connection type (Multilink).
Maximum Transmission Unit. Sets the largest packet size (bytes) the network
will transmit:
Automatic at 1500
Manual at a range of 576 to 1500.
Displays the device(s)/connection(s) required for this interface:
Adit 3000: Lists the T1(s) in this connection. These are links to the High
Speed Serial Configuration window. See Underlying Device - High Speed
Serial Configuration (Adit 3000 Only) on page 3-25.
Adit MSR: Lists the LCC(s) in this connection.
Enables Interleaving. The QoS Interleaving is used when there are QoS
considerations with voice or data. Packets are split with a low ToS precedence.
Sets the threshold byte size of the packet for Interleaving.
Range is 320 - 1600, with a default of 1600. If the packet is > the set threshold,
the packet will be split in half and sent.
Enter Login User Name, with a maximum of 100 characters.
Enter login password.
Select to enable support of the following:
Support Unencrypted Password (PAP)
Support Challenge Handshake Authentication (CHAP)
Support Microsoft CHAP (MS-CHAP)
Support Microsoft CHAP Version 2 (MS-CHAPv2)
The following PPP encryption can be enabled by checking the boxes:
Require Encryption (Disconnect if server declines)
Support Encryption (40 bit keys)
Support Maximum Strength Encryption (128 bit keys)
Network Connections
Connections that Require Configuration
3-19