Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Reference Manual page 243

2. Enter the PBX line information. See the following table for field definitions.
Field
Fast Configuration
First Phone Number Index
First Phone Number
Number of Lines
Authentication
User Name
Password
Description
Trunk ID
Logging
Per Line Logging
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Definition
Enter an index number for the phone number. If a number entered is
already listed, it will be overwritten. If the number is left at "0" then the
next available index number will be selected.
Enter a PBX phone number for this line.
Enter the number of lines to enter (they will be sequential following the
number entered above).
Single User Name - Authentication will be with the user name.
Phone Number - Authentication will be with the phone number entered.
Enter a User Name, with a maximum of 65 characters.
Enter a password associated with the User Name, with a maximum of 64
characters.
Enter a description, with a maximum of 20 characters. Note: This is not a
required field.
Displays the Trunk ID.
The checkbox enables (checked) or disables (unchecked) logging for each
line.
Voice over IP
Trunk Registration
6-37