Ricoh Aficio MP 5500 Operating Instructions Manual page 365

Message
Duplex is not
available with
this paper size.
Maximum number of
sets is nn.
(A figure is placed at n.)
File being stored
exceeded max.
number of pages
per file. Copying
will be stopped.
Magazine or Book-
let mode is not
available due to
mixed image mode.
Orig. is being
scanned by anoth-
er function.
Please wait.
You do not have
the privileges to
use this function.
You do not have
the privileges to
use this function.
Cause
A paper size not available
in Duplex mode has been
selected.
The number of copies ex-
ceeds the maximum copy
quantity.
The scanned originals
have too many pages to
store as one document.
You selected the Maga-
zine or Booklet function
for originals scanned us-
ing different functions,
such as copy and printer.
Document Server or
Scanner function is in
use.
This user code is not al-
lowed to use the function
selected.
This user code is not al-
lowed to use the function
selected.
When a Message Appears
Solution
The following paper sizes are available
for Duplex mode: A3L, B4L, A4KL,
B5KL, A5KL, 11"×17"L,
11"×15"L, 11"×14"L, 10"×15"L,
1
10"×14"L, Legal (8 / "×14")L, Letter
2
1
(8 / "×11")KL, Half Letter
2
1 1
(5 / "×8 / ")KL, Executive
2 2
1 1
(7 / "×10 / ")L, F/GL (8"×13")L,
4 2
1
Foolscap (8 / "×13")L, Folio
2
1 1
(8 / "×13")L, 8 / "×14"L,
4 4
1
8"×10 / "L, 8"×10"L, 8KL, 16KKL.
2
Select one of these sizes.
You can change the maximum copy
quantity. See "Max. Number of Sets",
General Settings Guide.
Press [Exit], and then store again with an
appropriate number of pages.
Make sure originals for the Magazine or
Booklet function are scanned using the
same function.
To cancel the job in process, press [Exit],
and then press the {Document Server} or
{Scanner} key. Next, press the
{Clear/Stop} key. When the message
"
The Clear / Stop key was
pressed. Are you sure you
want to stop scanning?
pears, press [Cancel].
Contact the administrator.
If the message continues to be displayed
and you cannot switch the screen, press
the {Energy Saver} key. Confirm that the
display goes off, and then press the {En-
ergy Saver} key again. The display will
return to the user code entry display.
When printing under the copier or
printer function, press the {Energy Sav-
er} key only after printing has finished.
2
" ap-
21