System Settings
System Settings on Main and Sub-machines
This section explains the System Settings on the two machines during Connect
Copy.
When connect copy is in progress, the {User Tools/Counter} keys of the sub-ma-
chines remain disabled. To change the default settings, first press [Connect Copy],
which is highlighted on main machine's control screen, then clear the connect
2
copy job, and then make the required changes.
General Features
How the defaults in the General Features of copying of the main and sub-ma-
chines are used in connect copy will be explained.
❖ Program / Change / Delete User Text
• The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖ Panel Key Sound
• The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖ Warm-up Beeper
• The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖ Copy Count Display
• Settings made on the main and sub-machines do not affect the connect
copy.
• The copy counter is always displayed as Up (count up).
❖ Function Priority
• Settings made on the main and sub-machines do not affect the connect
copy.
• When the Auto Reset time of the main machine has lapsed, Connect Copy
will be cancelled. After that, the machine switches back to the mode select-
ed in Function Priority upon reaching the System Reset time.
❖ Print Priority
• Settings made on the main and sub-machines do not affect the connect
copy.
• When the Auto Reset time of the main machine has lapsed, Connect Copy
will be cancelled. After that, the machine switches back to the mode select-
ed in Function Priority upon reaching the System Reset time.
86