Chrysler DODGE D150 1993 Service Manual page 107

2 - 54 FRONT SUSPENSION AND AXLE
Fig. 12 Spindle Removal
SEAL J9202-73
Fig. 13 Axle Shaft Removal
Fig. 14 Spindle Needle Bearing Removal
(2) Install a new spindle seal with Installer C-4373
and Handle C-4171 (Fig. 16).
(3) Install the seal with lip facing the axle shaft
splines (Fig. 17). Lubricate the seal (Fig. 18) with
Wheel Bearing Grease lubricant (NLGI Grade 2, E P
or an equivalent lubricant).
•
Fig. 15 Spindle Needle Bearing Installation
Fig. 16 Spindle Seal Installation
(4) Carefully install the axle shaft through the
knuckle into the axle housing. Ensure the axle shaft
splines are engaged with the differential side gears.
(5) Install the spacer on the axle shaft end.
(6) Install the brake splash shield and brake cali­
per support bracket.
(7) Install the splash shield and spindle on the
steering knuckle. Install the nuts and tighten to 81-
108 N-m (60-80 ft. lbs.) torque (Fig. 19).