Table of Contents
Advertisement
ProCore Edge North America
Positioning the Charger
CAUTION
The battery charger, when fitted with modules,
can be very heavy. Take precautions to avoid injury
when moving the charger.
Use appropriate material handling aids
(e.g., a pallet truck) to move the charger into position.
It is recommended to make use of a lifting hoist
(with straps or chains) wherever possible, especially
when the charger is raised above ground level.
Lifting eyebolts (M8 thread) can be attached to four
locations on the top panel of the charger to aid the
process (Figure 5). Remove the filler screws with
a 4-mm hex key before attaching the lifting eyebolts.
Figure 5 Attaching Points for M8 Lifting Eyebolts,
31241-03-01
Top-panel View
Page 10 of 68
Webasto Charging Systems, Inc.
IOMM
Advertisement
Table of Contents
