Table of Contents
Advertisement
ProCore Edge North America
Side-to-Side Charger Spacing with Dividers
Place metal panels between chargers for closer spacing
(Figure 3). The minimum charger-to-divider spacing,
for standard installations, is 4 in. (10 cm). The divider dimensions
should be, at a minimum, 24" H × 20" W and 30" H × 20" W
(609.6 mm H × 508 mm W and 762 mm H × 508 mm W)
for 3- and 5-bay cabinets, respectively.
Figure 3 Side-to-Side Charger Spacing with Dividers
Offset (45-degree–Angle) Charger Installation
Chargers may be installed also at an offset 45-degree angle for
higher density installations (Figure 4).
Figure 4 Offset 45-degree Angle Charger Installation
31241-03-01
4 in. (10 cm)
Page 8 of 68
Webasto Charging Systems, Inc.
IOMM
Advertisement
Table of Contents
