Positioning The Charger - Webasto ProCore Edge 9 Installation, Operation And Maintenance Manual

ProCore Edge North America

4.3 Positioning the Charger

CAUTION
The battery charger, when fitted with modules, can be very heavy.
Take precautions to avoid injury when moving the charger.
Use appropriate material handling aids (e.g., a pallet truck) to
move the charger into position. It is recommended to make use
of a lifting hoist (with straps or chains) wherever possible, especially
when the charger is raised above ground level.
Lifting eyebolts (M8 thread) can be attached to four locations
on the top panel of the charger to aid the process (Figure 5).
Remove the filler screws with a 4-mm hex key before attaching
the lifting eyebolts
Figure 5 Attaching Points for M8 Lifting Eyebolts, Top Panel View
31241-03-0202 Webasto Charging Systems, Inc.
14 of 68
IOMM