General Safety Regulations; General Information; Scope Of The Manual; Manufacturer - Vitrifrigo Trivalente Series User, Maintenance And Installation Manual

GENERAL SAFETY REGULATIONS

This sign is used in the manual each time
!
that failure to respect or incorrect
interpretation of the instructions that follow may
cause damage to persons or to the refrigerator,
whichwouldcompromisesafety.
Read this manual carefully before using the refrigerator.
Read and observe carefully all of the warnings that are shown on the
adhesive labels applied to the refrigerator.
In the event that this refrigerator is replacing an older model, we
recommend that any ocks on the old model be broken prior to disposal.
Ensure that the packaging is undamaged. In the event of damaged
packaging, please inform the carrier.
Remove the packaging and proceed to the installation of the product.
This must be done with the utmost care and the use of protective gloves
to prevent accidental
injuries to hands, is strongly recommended.
After unpacking the appliance, make sure that it is not damaged in any
way. Any damages must be communicated to the retailer no later than
24 hours from the date of purchase.
This appliance is exclusively for conserving food and beverages.
The refrigerator must be positioned away from heat sources and making
sure that it has adequate ventilation
(see the following indications).
Before connecting the appliance, make sure that the power supply
voltage and/or gas supply pressure from the pressure limitation valve
corresponds to that printed on the appliance rating plate.
Make sure that the mains power earthing system is in perfect working
order.
After completing the installation processes, make sure that the appliance
is not resting on any power cables.
In the event of operating problems, contact your nearest authorised
technical service engineer. In any case, always use qualified technicians.
Remove the plug from the power socket before carrying out any form of
maintenance or cleaning.
Do not place any liquids in glass bottles or containers inside the low-
temperature compartment.
Do not discard the appliance packaging. This material must be sorted
and disposed of according to the local standards in force with regard to
waste disposal.
At the end of its useful life, do not abandon the refrigerator in the
environment but contact the local bodies responsible for waste disposal.

2. GENERAL INFORMATION

Scope of the Manual

This manual is for refrigerators from the "Trivalente" range and for models
5040, 5060, 5070, 5075, 5080, 5090, 5105, and 5150. It is intended as a
guide for the correct and safe use of these refrigerators as well as to their
proper maintenance.
To learn in a short space of time how to operate and use your
refrigerator, you must read this use and maintenance manual with care
before using the appliance for the first time.
The correct operation of the refrigerator depends greatly on effective and
efficient maintenance. It is therefore necessary for you to know which
operations to perform. The guidelines for use indicate all switching on
and off and operating procedures.
Your refrigerator has been manufactured in compliance with all
(applicable) safety requirements set forth in the relevant directives.
However, operator safety - and that of other persons – depends upon the
careful reading of this manual and on regular and attentive cleaning and
maintenance.
Some information and/or diagrams in this manual may refer to details or
parts that differ slightly from your refrigerator, although essential
information has not been modified in any way. In the interests of constant
product improvement, your refrigerator may have variations that have not
been included in this manual. Modifications, if any, will be included as
necessary in subsequent versions of this manual.

Manufacturer

This refrigerator was designed and manufactured exclusively by :
Via Mazzini 75 fraz. Montecchio
61022 VALLEFOGLIA (PU)
Tel. +39 0721 154500
3.

ABOUT YOUR REFRIGERATOR

The trivalent refrigerator has been designed for boxed-in installation and
use on vehicles. It is equipped with a front control panel from which it is
possible to select the means of supplying power and the adjustment of
internal temperature. Possible power supply sources are: the vehicle
battery, the local mains power supply of the stopping place, and GAS. In
any case, always check that the voltage and type of gas are compatible
with that specified on the rating plate "E" (Fig. 1). The refrigerator has
been designed and manufactured to store food and beverages. For a
more detailed description of component parts, see the following
paragraph.
11
Vitrifrigo srl