Sony HDC-900 Operation Manual page 84

PAINT Menu
Page Setting item
BLK GAMMA RGB LEVEL
RGB RANGE
Y LEVEL
Y RANGE
TEST
KNEE POINT R,G,B,M
SLOPE R,G,B,M
WHT CLP R,G,B,M
KNEE SAT LEVEL
KNEE
WHT CLIP
AUTO KNEE
KEY SAT
TEST
DETAIL1 DETAIL
LEVEL
LIMITER
M/WHT/BLK
CRISPEN
HV RATIO
FREQ
LVL DEP
DETAIL2 KNEE APERTURE
SKIN DETAIL SKIN DTL
SKIN GATE
CH SW
GATE
PHASE
WIDTH
SAT
LEVEL
38(E)
Allowable settings Description
–99 to 0 to 99 Adjusts the R, G, B, and master black gamma.
1, 2, 3, 4 Sets the upper limit of the video level which the RGB black
gamma affects.
ON, OFF Turns the RGB black gamma correction function on or off.
–99 to 0 to 99 Adjusts the Y black gamma to adjust the contrast without
changing the chroma phase of the dark part.
1, 2, 3, 4 Sets the upper limit of the video level which the Y black
gamma affects.
ON, OFF Turns the Y black gamma correction function on or off.
1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
–99 to 0 to 99 Sets the R, G, B, and master knee point level.
–99 to 0 to 99 Sets the R, G, B, and master knee slope level.
–99 to 0 to 99 Sets the R, G, B, and master of the white clipping level.
–99 to 0 to 99 Sets the knee saturation level.
ON, OFF Turns the knee correction circuit on or off.
ON, OFF Turns the white clipping function on or off.
ON, OFF Turns the auto knee function on or off.
ON, OFF Turns the knee saturation function on or off.
1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
ON, OFF Turns the detail correction function on or off.
–99 to 0 to 99 Sets the general level of the detail signal.
–99 to 0 to 99 Sets the detail limiter.
–99 to 0 to 99 Sets the crispening level.
–99 to 0 to 99 Sets the level of V detail signals.
–99 to 0 to 99 Sets the frequency of the H detail signal.
ON, OFF Turns the level depend function on or off.
–99 to 0 to 99 Sets the level depend.
–99 to 0 to 99 Sets the knee aperture level.
ON, OFF Turns the knee aperture function on or off.
ON, OFF Turns on or off the skin-tone detail function.
ON, OFF Turn the zebra indication of the skin tone detail portion on or
off.
ON, OFF Turns each channel of the skin detail function on or off.
Channel 1 is fixed to ON.
ON, OFF Turns each channel of the skin gate function on or off. Any
one of channels is set to on.
AUTO Sets automatically the region of each channel the skin detail
function affects
0° to 359° Adjusts the center phase of the hue being processed by the
skin-tone detail function to each channel.
0° to 90° Adjusts the width of the hue being processed by the skin-tone
detail function to each channel.
–99 to 0 to 99 Adjusts the saturation level of the hue being processed by the
skin-tone detail function to each channel.
–99 to 0 to 99 Sets the skin tone detail amount to each channel.