Viewfinder Screen Setup Menu Displays - Sony HDC-900 Operation Manual

Viewfinder Screen Setup Menu Displays

When the DISPLAY switch is set to MENU, the
OPERATION menu will be displayed on the
viewfinder screen. The OPERATION menu is
displayed one page at a time.
The OPERATION menu is used to select various
setting values, and to select items which will be
displayed on the viewfinder screen and how those
items will be displayed.
About the TOP menu
The TOP menu displays the overall organization of the
various menus.
< TOP MENU >
c USER
USER MENU CUSTOMIZE
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
Note
The TOP menu contents vary based on the settings of
switches inside the camera.
For more information, refer to the Installation &
Maintenance Manual.
To display the TOP MENU screen
Move the DISPLAY switch from OFF to MENU while
pushing the MENU SELECT switch toward ENTER.
POWER
R G B
FILTER LOCAL H-POSI V-POSI
2 3 4
1 5
ON
ND
STORE
UP TALLY
B C D WIDTH HEIGHT
ON
A E
CC
OFF
VF SCREEN SIZE CENTER SAFETY
DISPLAY MENU SELECT
SCAN MARKER MARKER ZONE
16:9 ON ON ON
ON
OFF
CANCEL ENTER
4:3 OFF OFF OFF MENU
RET 2 RET 1
2 3 2 3
4 4
1 1
M S
EMORY TICK
CURSOR
1
1 2 3
VF DETAIL
ON
CALL
OFF
MENU SELECT knob
MENU SELECT switch
DISPLAY switch
The TOP menu has the following sub-menus:
USER menu
This menu allows you to register items used
frequently. This menu can contain up to 60 pages. You
can add or delete items using the USER MENU
CUSTOMIZE menu.
USER MENU CUSTOMIZE menu
This menu allows you to add desired menu pages or
items, or delete them to suit your needs.
For detailed information, see "Using the USER Menu" on
page 23(E).
OPERATION menu
This menu contains items whose settings need to be
changed during normal operation by a camera
operator, according to the condition of the subject or
other conditions.
Ordinarily, when the DISPLAY switch is set to MENU
this menu will be displayed.
For details on adjustments and setup to be performed using
this menu, see "Setup Using the OPERATION Menu" on
page 27(E).
PAINT menu
This menu contains items for when precise image
adjustment is being performed by observing the
camera's output waveforms using a device such as a
waveform monitor.
Setting up the camera for the items of this menu can be
performed using an external remote control panel or
master setup unit, but this menu itself is convenient
when the camera is used outdoors in a stand-alone
configuration. This menu is about the same as the
MSU-700A/750 PAINT menu.
For details on adjustments to be performed using this menu,
see "PAINT Menu" on page 36(E).
Other menus
The following menus contain items necessary only
when the camera is first put into operation or during
periodic maintenance.
MAINTENANCE menu: Used for maintenance.
About the same as the MSU-700A/750
MAINTENANCE menu.
FILE menu: Used to write and clear reference
files, OHB files, lens files, and Operator Preset
files.
DIAGNOSIS menu: Displays self-diagnosis
information.
For details on these menus, refer to the Installation &
Maintenance Manual.
19(E)