Sony HDC-900 Operation Manual page 83

PAINT menu items
Page Setting item
SW STATUS FLARE
GAMMA
BLK GAM
KNEE
WHT CLIP
DETAIL
LVL DEP
SKIN DTL
MATRIX
VIDEO LEVEL WHITE R,G,B
BLACK R,G,B,M
FLARE R,G,B
GAMMA R,G,B,M
V MOD R,G,B,M
FLARE
V MOD
TEST
GAMMA LEVEL
COARSE
TABLE
GAMMA
TEST
a) STANDARD
1: INITIAL GAIN 3.5 (equivalent to ENG camcorder)
2: INITIAL GAIN 4.0 Low ( equivalent to EFP camera)
3: INITIAL GAIN 4.0 High (equivalent to EFP camera)
4: INITIAL GAIN 4.0 (equivalent to SMPTE-240M)
5: INITIAL GAIN 4.5 (equivalent to ITU-709)
6: INITIAL GAIN 5.0
Allowable settings Description
ON, OFF Turns flare correction on or off.
ON, OFF Turns gamma correction on or off.
ON, OFF Turns black gamma correction on or off.
ON, OFF Turns knee correction on or off.
ON, OFF Turns white clipping on or off.
ON, OFF Turns the detail signal on or off.
ON, OFF Turns the level depend function of the detail signal on or off.
ON, OFF Turns the skin detail on or off.
ON, OFF Turns linear matrix correction on or off.
–99 to 0 to 99 Adjusts the white level of R, G, and B.
–99 to 0 to 99 Adjusts the R, G, B, and master black level.
–99 to 0 to 99 Adjusts the R, G, and B flare level.
–99 to 0 to 99 Adjusts the R, G, B, and master gamma correction curve.
–99 to 0 to 99 Adjusts the R, G, B, and master V modulation shading.
ON, OFF Turns the flare correction circuit on or off.
ON, OFF Turns the V modualtion shading on or off.
1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
–99 to 0 to 99 Sets the R, G, B, and master gamma correction curve.
0.35 to 0.90 Sets the master gamma correction curve step by step (in 0.05
steps).
STANDARD Selects the gamma table.
a)
1, 2, 3, 4, 5, 6
b)
USER 1, 2, 3, 4, 5
ON, OFF Turns the gamma correction function on or off.
1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
b) USER
1 to 5: Selects the user gamma table stored in the
camera.
About the user gamma function
You can create the desired gamma table using a personal
computer on which special software has been installed and
load this table into your camcorder via a Memory Stick.
When a user gamma table is selected, gamma (LEVEL,
COARSE or ON/OFF) and knee (POINT, SLOPE, ON/OFF
or AUTO KNEE) or both may become disabled. This is
because the gamma and knee are compulsorily fixed when
creating the gamma curve.
37(E)