Sony HDC-900 Operation Manual page 50

Overview
The HDC-900/910 Color Video Camera is a CCD-
based color video camera designed for studio use. The
camera may be used with devices such as a camera
control unit, video selector, master setup unit, and/or
remote control panel to form an HDC-900 series
camera system. Also, a CNU-700 Camera Command
Network Unit may be used to create a system capable
of controlling up to 96 video cameras.
Features
The HDC-900/910 has the following features:
High picture quality and high performance
The new 2 / -type 1080 Phase II FIT-CCD (HDC-900)
3
2
or / -type 1080 IT-CCD (HDC-910) for 2,200,000
3
pixels and a unique CCD output signal processing
circuit and 12-bit A/D converter provide high picture
quality and high performance.
Multiple formats
The HDC-910 covers 50I as well as 60I systems. The
HDC-900 also covers Progressive Scan (PsF) systems
in addition to 50I and 60I systems.
1)
Memory Stick operation
The camera is equipped with a memory stick drive,
which enables setup data storage and software
upgrading using memory sticks.
..........................................................................................................................................................................................................
1) "Memory Stick" and
of Sony Corporation.
2) Safety zone marker
A box-shaped marker displayed on the viewfinder screen
which indicates 80%, 90%, 92.5%, or 95% of the total
screen area.
4(E)
Selection of gamma table
Multiple gamma tables are provided, enabling you to
use multiple formats and perform flexible image
creation.
Wide variety of detail control functions
Skin tone detail function
Allows control (emphasis or suppression) of the detail
level for just a certain hue or chroma area in the image,
by creating a detail gate signal from hue color
components centered on skin tones.
Detail boost frequency control
The boost frequency can be adjusted from 20 MHz to
30 MHz. This allows the detail thickness to be set
appropriately for the subject, thus enabling more subtle
image expression.
H/V ratio control
The ratio between horizontal and vertical detail can be
adjusted.
White/black limiter
The white side and black side detail can be limited
independently.
Easy menu-based setting
Selections and settings for shutter speed, ECS, Super
EVS mode, viewfinder display items, video gain,
safety zone marker
marker, etc. may be made quickly and easily using
setup menus displayed on the viewfinder screen or an
external monitor.
3) Center marker
are trademarks
A cross-shaped marker which indicates the center of the
viewfinder screen.
2) or center marker 3) , screen size