Page 2: Table Of Contents
4-1. Sony Camera Command Network System........50...
Page 3 7-1. HDC-900, HD Color Video Camera ........
Page 4 Chapter 8 Connectors and Cables........142 8-1. HDC-900/950/930 and HKC-T950, HD Color Video Camera and HD CCD Black Adaptor . . 143 8-1-1 Connector Input/Output Signals .
Page 5 8-8-1-2 EXT I/O ..........165 HDC-900/950/930 Series Product Information Manual...
Page 6 10-1. HDC-900, HD Color Video Camera ........
Page 7 Function comparison chart – Button and Knob ....... . . 201 HDC-900/950/930 Series Product Information Manual...
Page 8: Chapter 1 Introduction
Chapter 1 Introduction Introduction...
Page 9: Overview
Sony production companies, etc. The HDC-900 Series camera control system and its familiar menu control consists of HDC-900 full size studio model color video systems to be used with the HDC-900/950/930, camera and the HDC-950/930, its flawless companion resulting in quick and reliable installation and a wide portable version.
Page 10 Selectable Gamma and Initial Gain Several Pre-set Gamma curves and Initial Gain settings are provided to emulate standardized video * The ECS function is available with the HDC-900 and HDC- gamma transfer characteristics. These gamma tables are always accessible and interchangeable via the camera set-up menu.
Page 11: Features Of The System Components
MSU-750 is Two camera control units are available for use with the designed for mounting vertically. They have been HDC-900/950: the full size HDCU-900 and half rack designed to allow comprehensive, wide ranging, HDCU-950. The HDCU-900 has been designed to...
Page 12 Safety Oriented Power Supply panning and tilting angles are greater than those of As safety is a major design concept of every Sony CRT-based viewfinders. The HDVF-C700W is for use design, the HDCU-900/950 continuously checks the with the HDC-900 camera and the HDVF-C750W for camera cable for open or short circuits.
Page 13: Chapter 2 Total System
Chapter 2 Total System Total System...
Page 14: System Configuration
As a major design criteria, the HDC-900 Series portable model is designed for full integration into an inherited all the benefits from Sony digital camera HDC-900 studio system, as well as being used as a systems such as the BVP-900/700/500 Series to standalone acquisition camera.
Page 15 Figure 2-2: Optional Accessories for the HDC-900 HDVF-700A 7-Type Viewfinder HFH-770 Outdoor Hood (with standard hood) (sold separately) Front cover (supplied) HDVF-C700W 6-Type Viewfinder HDC-900, HDC-900/L HD Color Video Camera Zoom lens BKP-7911 Script Holder (with Light) HDCU-900 HD Camera Control Unit...
Page 16 OPEN MAIN SHORT BLACK MAINTE INCOM NANCE PROD PRIV SCENE AUTO IRIS/MB ACTIVE MASTER IRIS BLACK PAINT IRIS ALARM REMOTE CONTROL UNIT HDC-950/930 + HDVF-20A HDCU-950 + RM-B750 Remote Control Unit HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 17: Camera Head
The ratio between horizontal and vertical detail can be These improvements contribute to an unsurpassed adjusted. image quality, making the HDC-900 Series a true ‘top- White/black limiter of-the-line’ studio/OB camera. The white side and black side detail can be limited The HDC-950/930 is the portable version of the independently.
Page 18: Camera Control Unit
Adding the optional units allows the following Also, the HDCU-900/950 is equipped with an alarm signal outputs: indicator to warn of open or short circuits in the cable. HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 19: Control System
Camera Command Network Units (CNU-700 and There are four ranges of remote control panels for CNU-500) remote control of the HDC-900 Series via the HDCU- The Camera Command Network Units are designed to 900/950 Camera Control Unit. For the iris and master...
Page 20: Optional Accessories
Viewfinder Rotation Other countries: 1-782- Bracket 929-XX C-74 Microphone Power cord plug holder:USA and Canada: 2- CA-905L Large Lens Adaptor 990-242-01 CAC-6 Return Video Selector Other countries: 3-613- CAC-12 Microphone holder 640-01 HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 21: System Setup
• Be sure to install the HKCU-901/903/904 into the same slot on the front and rear sides. • Do not install two or more of the same circuit boards at the same time. HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 22: Hd System
DPR-163 board (S804 : LOCAL) FC-83 board board S805 S807 S806 S603 1080/59.94I SDI Intr /1001 1080/59.94I SDI Film Like /1001 1080/59.94I Analog Intr /1001 1080/50I SDI Intr /1000 * -NA HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 23 SD REFERENCE SIGNAL Next HDCU-900 SD ANALOG VIDEO SIGNAL HD-SDI Monitor HD-SDI Monitor CNU-700 Terminated at 75 PIX 1 PIX 2 VCS-700 REMOTE WF 1 WF 2 PIX A WF A HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 24 SD REFERENCE HDCU-900 SIGNAL SD ANALOG VIDEO Next HDCU-900 SIGNAL HD-SDI Monitor HD-SDI Monitor CNU-700 PIX 1 PIX 2 VCS-700 Terminated at 75 REMOTE WF 1 WF 2 PIX A WF A HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 25 HD ANALOG VIDEO SIGNAL Picture Monitor Picture Monitor CNU-700 Terminated at 75 SD ANALOG VIDEO SIGNAL PIX 1 PIX 2 VCS-700 SD REFERENCE SIGNAL REMOTE WF 1 WF 2 PIX A WF A HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 26: Sd System
DPR-163 board (S804 : LOCAL) FC-83 board board board S805 S807 S806 S603 S802 525/59.94I SDI Intr /1001 525/29.97 PsF SDI Film /1001 Like NTSC Intr /1001 625/50I SDI Intr /1000 Intr /1000 * -NA HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 27 SYNC OUT PIX OUT WF OUT WF MODE SERIAL OUTPUT HDCU-900 SD REFERENCE SIGNAL Next HDCU-900 SD ANALOG VIDEO SIGNAL Picture Monitor Picture Monitor Waveform Monitor Waveform Monitor CNU-700 Terminated at 75 HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 28 SYNC OUT PIX OUT WF OUT WF MODE SERIAL OUTPUT HDCU-900 SD REFERENCE SIGNAL Next HDCU-900 SD ANALOG VIDEO SIGNAL Picture Monitor Picture Monitor Waveform Monitor Waveform Monitor CNU-700 Terminated at 75 HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 29 PIX OUT(For MSU) PIX 2 SD REFERENCE SIGNAL WF 2 SD ANALOG VIDEO SIGNAL WF OUT(For MSU) Next HDCU-900 VCS-700 PIX 1 WF 1 REMOTE PIX A WF A CNU-700 Terminated at 75 HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 30: Progressive And Cinema Production System
/1001 720P 720/59.94P SDI Intr 720/59.94P SDI Film Like /1001 720P 1080/23.98PsF SDI /1001 1080/24PsF SDI /1000 1080/25PsF SDI /1000 1080/29.97PsF SDI /1001 1080/30PsF SDI /1000 525/29.97PsF SDI /1001 * -NA HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 31 SYNC OUT SERIAL OUTPUT HDCU-900 Next HDCU-900 PIX 2 SD REFERENCE SIGNAL WF 2 SD ANALOG VIDEO SIGNAL VCS-700 PIX 1 WF 1 REMOTE PIX A WF A CNU-700 Terminated at 75 HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 32: Hd/Sd Simul-Cast System
1080/59.94I SDI 525/59.94I SDI Intr /1001 1080/59.94I SDI NTSC Intr /1001 1080/50I SDI 625/50I SDI Intr /1000 1080/50I SDI Intr /1000 540P 720/59.94I SDI 525/59.94I SDI /1001 720P Intr * -NA HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 33 PIX OUT (For MSU) SD ANALOG VIDEO SIGNAL WF OUT (For MSU) WF 2 Next HDCU-900 PIX 1 VCS-700 WF 1 REMOTE PIX A CNU-700 WF A Terminated at 75 SD REFERENCE SIGNAL HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 34: Setting The System Format Using Hdcu-950
REMOTE, set the SD signal output to NTSC (525/60) or PAL (625/50). Setup switch : S423-1 on the AT-149 board (Factory setting : OFF) ON : PAL (625/50) OFF : NTSC (525/60) HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 35: Standard System
HDCU-950 w/ HKCU-951 installed Rear side CN-2219 CN-2220 SDI-70 HIF-5 DIF-124 VDA-61 Front side AT-149 AVP-4 DTX-1 DRX-1 FC-88 RC-91 HDCU-950 w/ HKCU-953 installed Rear side CN-2219 CN-2220 SDI-70 HIF-5 SDI-73 DIF-124 HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 36: Standard Hd/Sd System
+B M3 +B M3 +B M3 MIC REMOTE INCOM/TALLY/PGM +B M3 +B M3 +B M3 HDCU-950 HD-SDI Monitor SD ANALOG VIDEO SIGNAL Next HDCU-950 SD REFERENCE SIGNAL CNU-700 Terminated at 75 HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 37: Hd/Sd Film Like System
+B M3 +B M3 +B M3 MIC REMOTE INCOM/TALLY/PGM +B M3 Waveform Monitor +B M3 +B M3 HDCU-950 SD ANALOG VIDEO SIGNAL SD REFERENCE SIGNAL Next HDCU-950 CNU-700 Terminated at 75 HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 38: Analog Ntsc/Pal System
+B M3 +B M3 HDCU-950 Next HDCU-950 WF 2 PIX 2 SD ANALOG VIDEO SIGNAL SD REFERENCE SIGNAL VCS-700 PIX 1 WF 1 PIX A REMOTE WF A CNU-700 Terminated at 75 HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 39: Rack Mounting Of System Equipment
EIA rack. These units either mount directly into the rack or with optional slide rails such as the Sony RMM-30 Rack Mount Rail. These slide rails allow the unit to be easily pulled out from the rack and are recommended if you intended to pull out the unit frequently.
Page 40 • Be careful not to catch your finger or hand in the rack mount rail. • Mount in the rack in a stable position. Injury could occur by drop of the unit in unbalance condition of HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 41 The RCP-750/751/700/701 and the MSU-700A/750 can be mounted into a 19-inch rack using an optional drawer. Each type of equipment requires different parts to mount it into the drawer. Cover Drawer RCP-700 Series HDC-900/950/930 Series Product Information Manual Chapter 2 Total System...
Page 42: Chapter 3 Benefit Of Sony Adsp (Advanced Digital Signal Processing)
Chapter 3 Benefit of Sony ADSP (Advanced Digital Signal Processing) Benefit of Sony ADSP (Advanced Digital Signal Processing)
Page 43: Full Dsp Camera Processing
After selection of the color phase, its hue and Photo 3-2: Multi Matrix (Vectorscope) saturation can be adjusted. Figure 3-1: Multi Matrix saturation Normal HDC-900/950/930 Series Product Information Manual Chapter 3 Benefit of Sony ADSP (Advanced Digital Signal Processing)
Page 44: Precise Handling Of Highlight Position
(2) Knee saturation Knee Saturation eliminates both the 'washed out' effect and hue changes in overexposed areas of a picture, providing more natural color reproduction. Normal HDC-900/950/930 Series Product Information Manual Chapter 3 Benefit of Sony ADSP (Advanced Digital Signal Processing)
Page 45 Phase luminance parts remaining unchanged. Figure 3-3: Knee curve image Intput signal level white clip Saturation auto slope Output signal level ..HDC-900/950/930 Series Product Information Manual Chapter 3 Benefit of Sony ADSP (Advanced Digital Signal Processing)
Page 46 Photo 3-7: Adaptive Detail Control ON and OFF Normal The black edges are removed. HDC-900/950/930 Series Product Information Manual Chapter 3 Benefit of Sony ADSP (Advanced Digital Signal Processing)
Page 47 Figure 3-5: Electronic Soft Focus signal image Original Enhancer Soft Focus Photo 3-8: Electronic Soft Focus ON and OFF Normal Electronic Soft Focus On (Softer than with Detail Off) Detail Off HDC-900/950/930 Series Product Information Manual Chapter 3 Benefit of Sony ADSP (Advanced Digital Signal Processing)
Page 48: Outstanding Reliability And Easy Maintenance
This is considerably set-up of camera systems for regular realignment. improved with Sony digital processing. In Sony ADSP Finally, a great benefit of Sony ADSP cameras is their cameras, all the processing parameters are advanced self-diagnostic system. HDC-900 Series...
Page 49: Chapter 4 Control System
Chapter 4 Control System Control System...
Page 50: Sony Camera Command Network System
Photo 4-1: MSU-700A Master Set-up Unit picture composition. In the HDC-900 Series camera system, Sony has adopted the philosophy that all technical controls are important and that remote access to virtually all controls on a single control panel would bring higher operational efficiency.
Page 51: Camera Command Network Units - Cnu-700 And Cnu-500
Available with optional AUX connector Programable with remote control RS-232C connector for ISR RS-232C connector for switcher etc. Two when BKP-7930 fitted REF. video in Character out Assignment between RCP and Free Fixed CHU/CCU HDC-900/950/930 Series Product Information Manual Chapter 4 Control System...
Page 52 Figure 4-1: CNU-700/500 Basic System Configurations (Up to six cameras with one CNU-700 or CNU-500) Command Video Character Monitor HDC-900 Waveform Vector HDCU-900 Monitor Scope Down Con.Outputs VCS-700 B/W monitor for character display CNU-700/500 NTSC or HDCU-950 HDC-950 MSU-700A RCP-700 Series HDC-900/950/930 Series Product Information Manual Chapter 4 Control System...
Page 53 HDC-900 Waveform Vector Down Con. Monitor Scope HDCU-900 Outputs VCS-700 (1) VCS-700 (2) B/W monitor for character display BKP-7930 NTSC CNU-700 HDC-950 HDCU-950 Down Con.Outputs MSU-700A Command Video Character RCP-700 Series HDC-900/950/930 Series Product Information Manual Chapter 4 Control System...
Page 54 Note: With the addition of an external camera selector switching panel, RCP-700 Series upto 96 cameras with 8 CNU-700s (with BKP-7930 installed) can be controlled from a single MSU-700A. RCP-700 Series HDC-900/950/930 Series Product Information Manual Chapter 4 Control System...
Page 55 Figure 4-4: Multi-MSU Operation Example (1) HDC-900 ENGINEERING ROOM HDCU-900 MSU-700A VCS-700 Down Con. Outputs HDC-950 CNU-700 (1) HDCU-950 MSU-700A RCP-700 Series VIDEO CONTROL ROOM HDC-900/950/930 Series Product Information Manual Chapter 4 Control System...
Page 56 HDC-900 HDCU-900 VCS-700 MSU-700A Down Con. Outputs CNU-700 STUDIO 2 HDC-900 HDCU-900 VCS-700 Down Con. MSU-700A Outputs CNU-700 STUDIO 3 HDC-900 HDCU-900 VCS-700 Down Con. MSU-700A Outputs CNU-700 MSU-700A Supervisory MSU HDC-900/950/930 Series Product Information Manual Chapter 4 Control System...
Page 57: New Remote Control Panels - Rcp-750/751
The RCP-750/751 Remote Control Panel is newly Four units mountable on a 19-inch rack designed for remote control of the Sony BVP/HDC- Up to four units of this control panel can be mounted in Series Color Video Camera via the CCU/HDCU-Series a line on a 19-inch EIA standard rack.
Page 58 6Camera number/tally indication window MASTER BLACK RELATIVE SENS CLOSE OPEN COARSE Iris/master black control block AUTO IRIS/MB ACTIVE 7ALARM indicator ALARM CALL 8CALL button 9PANEL ACTIVE button PANEL ACTIVE IRIS REMOTE CONTROL PANEL HDC-900/950/930 Series Product Information Manual Chapter 4 Control System...
Page 59 CAM 3 controlles from RCP5, and CAM 5 controlled from RCP 6 HDC-900 CNU-700 HDCU-900 CCU 1 Down Con. VCS-700 Outputs CCU 2 CCU 3 CCU 4 MSU-700A MSU 1 CCU 5 HDC-950 CCU 6 RCP-740/741 HDC-900/950/930 Series Product Information Manual Chapter 4 Control System...
Page 60: Auto Set-Up
The S-Bus Concept of the operational advantages of the S-Bus system is A further advantage of the Sony camera control system that the routing of input signals to the primary inputs - is the 'S-Bus control' technique, which is based on an of a DVS-7000/8000 Series Video Switcher can be original Sony concept.
Page 61 RCPs in a system that does not include equipment an MSU-700A/750 All S-Bus equipment detects the connection configurations between camera heads, HDCUs and RCPs by communicating with each other. This means that other S-Bus equipment can change the HDC-900/950/930 Series Product Information Manual Chapter 4 Control System...
Page 62 Video BNC Camera name display onto CNU Serial Tally Transfer Sony uses a PC as the primary control station of a Decodes S-Bus serial tally signal and forward to digital router. Each camera can be given a name with HDCU.
Page 63: Chapter 5 Optical Fiber Connector And Cable
Chapter 5 Optical Fiber Connector and Cable Optical Fiber Connector and Cable...
Page 64: Optical Fiber Overview
When the turning stops, forcedly pull out the remover in the straight line. Note The alignment sleeve can be removed/reinstalled with the sleeve itself attached to the tip of the remover. HDC-900/950/930 Series Product Information Manual Chapter 5 Optical Fiber Connector and Cable...
Page 65 Insert the remover with the alignment sleeve attached to its tip, and push it until it clicks. Rotate the remover counterclockwise to install the alignment sleeve, and extract the remover. HDC-900/950/930 Series Product Information Manual Chapter 5 Optical Fiber Connector and Cable...
Page 66: Chapter 6 A Quick Lesson On Camera Settings
Chapter 6 A Quick Lesson on Camera Settings A Quick Lesson on Camera Settings...
Page 67: Case 1 - For Situations Requiring Minimal Camera Operator Experience
3 to 6 [1] Preparation beforehand - A total white months. Be sure to keep the scale at normal pattern or an integrating spherical pattern HDC-900/950/930 Series Product Information Manual Chapter 6 A Quick Lesson on Camera Settings...
Page 68: Initial Settings For The Control System
See Change "To enable to cancel the security code" Press and light the CONFIG button. The configuration menu appears on the display. Engineer Mode Press [MSU]. HDC-900/950/930 Series Product Information Manual Chapter 6 A Quick Lesson on Camera Settings...
Page 69: To Change The Security Code
Enter the old security code using the numeric keys, authorized operator is absent, the security code can then press [OK]. be canceled by the following procedure: HDC-900/950/930 Series Product Information Manual Chapter 6 A Quick Lesson on Camera Settings...
Page 70: Setting The Security Status
6-3-2 Setting the Security Status You can limit the control functions of the MSU-700A/ 750 when required. The status setting is enabled in the Engineer Mode. Cancel HDC-900/950/930 Series Product Information Manual Chapter 6 A Quick Lesson on Camera Settings...
Page 71: Msu Assignment
750 when multiple MSU-700A/750 units are used in the same system. This assignment operation is enabled in the Engineer Mode. Turn on the CONFIG/MSU/ SECURITY/ENGINEER Mode to activate the Engineer Mode. HDC-900/950/930 Series Product Information Manual Chapter 6 A Quick Lesson on Camera Settings...
Page 72: To Restore Operations Of The Msu-700A/750
Be sure to enable the camera selection for at least one camera. If selection/control is disabled for all the connected cameras, the MSU-700A/750 becomes inoperative and the MSU Assignment HDC-900/950/930 Series Product Information Manual Chapter 6 A Quick Lesson on Camera Settings...
Page 73: To Display The Msu Configuration Menu
EL Bright Bright Bright 11: 47: 27 Buzzer Volume Level Call Touch Switch Date Time Cancel All Off Buzzer Click Click Year Month Call Touch Switch Master 1998 HDC-900/950/930 Series Product Information Manual Chapter 6 A Quick Lesson on Camera Settings...
Page 74: To Turn On/Off The Buzzers Independently
To adjust the brightness of the EL display You can adjust the brightness of the display of the menu control block. To adjust the brightness, proceed as follows. HDC-900/950/930 Series Product Information Manual Chapter 6 A Quick Lesson on Camera Settings...
Page 75: File Structure
Screen saver setting area 6-4. File Structure The HDC-900 is able to store adjustment data in (4) Reference File memory in the form of files. There are six types of files, Stores the custom paint data adjusted by the video for different purposes: engineer.
Page 76: Chapter 7 Location And Function Of Parts And Controls
Chapter 7 Location and Function of Parts and Controls Location and Function of Parts and Controls...
Page 77: Hdc-900, Hd Color Video Camera
7-1. HDC-900, HD Color Video Camera 7-1-1 Right Side and Left Side Panels 1 Up tally lamp 2 Safety lock Right side 3 Camera number plate 4 Side panel lock screw 5 Lens lock and knob 7 Accessory bracket 6 Cable clamp...
Page 78 Used to secure the fiber optic cable. The clamp is Connect to a DC power source (10.5 to 17 V) when designed for the FC2-PD50 and FC2-PD250. using the HDC-900 as a stand-alone unit. g Accessory bracket s AC OUT connector Used to secure optional accessories such as the BKP- Used to supply AC power (200 VA maximum).
Page 79: Rear Panel
Control Panel is set to OFF. The video output to the monitor connected to the TEST Yellow: Power is being supplied to the HDC-900, but OUT connector will always be the Y signal regardless the VF PW button of the MSU-700A/750 Master of these buttons.
Page 80 ON: A frame marking 90% of the picture area (the safety zone) will be displayed on the viewfinder screen. Using the Marker Settings page in the HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 81 • These connectors may also be used for monitoring a This knob selects from the four return signals from the VTR playback audio signal when the HDC-900 is CCU. By pressing in the RET 1 button, you can view used as a stand-alone unit.
Page 82: Hdc-950/930, Hd Color Video Camera
Used to select the gain of the video amplifier based on lighting conditions. The gain values for the L, M, and H settings may be set using the menus. When shipped HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 83: Front Left Side
1 TEST OUT connector For future use 2 MIC 1 IN connector 7 INCOM/EAR LEVEL control 3 RET 1 button 8 VTR START button 4 MIC IN switch HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 84: Back Left Side
Connect an earphone or headset for output of the VTR b CCU (Camera Control Unit) connector (optical playback audio signal. multi connector) Connects to a camera control unit via an optical electro-composite cable. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 85 700A/750 Master Setup Unit. k DC OUT (DC power supply output) connector (4- pin) Used to supply power to devices such as a wireless receiver (optional). HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 86: Back Right Side
1 PGM control and select switch PROD PROD 2 Line select switch INCOM INCOM LEVEL TALK LEVEL TALK 3 LEVEL/TALK switch INCOM INCOM 4 INCOM control HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 87: Hdcu-900, Hd Camera Control Unit
HDCU-900, a video camera, an RCP- 700 series Remote Control Panel connected via the REMOTE connector, etc. Setting the switch to the " " HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 88: Rear Panel
To use a headset with a plug other than an XLR 5-pin it off. When a remote control panel is connected and plug, consult a Sony service or sales representative. the power supply is turned off with the CAM PW button...
Page 89: Hd Signal Input/Output Block
DIGITAL AUDIO connector (BNC type) Used to connect the HDCU-900 to the Used to output a digital audio signal input to the TRACKER connector on an HDC-900 HD Color camera. Video Camera via an RS-232C interface. Used mainly for communication with equipment on the f MIC OUTPUT (microphone output) connectors camera side.
Page 90: Sd Signal Input/Output Block
The SC phase of the VBS signal output from connectors 3 and 4 is not locked to the black burst signal supplied to the REFERENCE IN connector. Use the monitor in Internal sync mode. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 91: Hkcu-901 Sd Analog Interface Unit
(BNC type) Used for output of either Y, B-Y, R-Y component video or G, B, R component video signals. The type of signal HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 92: Hkcu-902 Hd Analog Interface Unit
SERIAL individually using switches on the AT board in the OUTPUT 1 to 3 connectors. HDCU-900, or using the MSU-700A/750 Master Setup Unit. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 93: Hkcu-904 Line Converter Unit
(1 step=5 ms, 1- frame delay: 30 frames/s=7, 25 frames/s=8) AUDIO PHASE control MAIN OUTPUT AUDIO PHASE OPTICAL SYSTEM CHU LOCK CONDITION 540P 1035 POWER POWER /1.001 HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 94: Internal Boards - At Board
It flashes to warn about via the REMOTE connector, etc. The MAIN and CAM (camera) indicators light when the power is turned on. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 95: Rear Panel
PGM (program): To output the program audio to the Note intercom connector To use a headset with a plug other than an XLR 5-pin plug, consult a Sony service or sales representative. 7-4-2 Rear Panel 1 HD SDI OUT 1 and HD SDI OUT 2 connectors...
Page 96: Output Block - Dif Board
MSU-700A/750 Master Setup Unit. Signals of different types cannot be connected simultaneously. Note If a signal asynchronous with the HDCU-950 is supplied, it may affect the picture quality of return video. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 97: Hkcu-951 Sd Encoder Unit
An internal setting enables the SD SDI OUT1 and OUT2 connectors on the DIF board also to be used as analog VBS outputs. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 98: Internal Switches And Internal Boards - Internal Switches
COARSE switch. The COARSE switch will return to its OPEN: Balanced type original position when you release it. Press and hold it toward ADV to advance the phase or toward DELAY for phase delay. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 99: Internal Switches And Internal Boards - Avp Board
The adjustment range is from NORM (60 dB) to MIN (20 dB) in 10-dB steps. This switch changes the gain of a microphone amplifier in the camera. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 100: Internal Switches And Internal Boards - Drx Board
The LED is lit when the power voltage inside the board RIGHT 6 Edge-crop position setting switch is normal. LEFT b VBS controls To adjust VBS signal: LEVEL: To adjust the video level HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 101: Internal Switches And Internal Boards - Fc Board
REF IN: The LED is lit when a subsidiary reference signal for frame lock is being supplied. UNLOCK: The LED lights if correct lock to the subsidiary reference signal being supplied cannot be achieved. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 102: Cnu-700, Camera Command Network Unit
CNU-700 units. You Reserved for RS-232C interface can connect up to eight CNU-700 units. Reserved for RS-232C Not used system HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 103: Cnu-500, Camera Command Network Unit
Connect to an AC power source using the supplied AC power cord. The power cord can be fixed to the CNU- 500 using the supplied plug holder. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 104: Internal Board
Selects whether the sync signal is to be added to the video signal output from the CHARACTER connector. At the factory, the switch is set to ON (added). HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 105: Vcs-700, Video Selector
VCS-700. When using two or more VCS-700 units, connect this connector to the WF A INPUT connector on each subsequent VCS-700, and a HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 106: Msu-700A, Master Setup Unit
ON. (The button promptly flashes SETUP) for all the connected cameras of the same until the camera becomes ready for transmission.) group. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 107 The button lights during adjustment and goes dark when adjustment is completed. If you press this button when lit or the START/ BREAK button, the automatic HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 108 For battery replacement, refer to the instructions for the IC various paint items, such as white, black and card. flare. B Control knobs (rotary encoders) Adjust the selected items on the touch panel. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 109 An corresponding ND filter. indicator whose corresponding camera (or HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 110 It continuously changes when either range of ±2f with this control. button is kept pressed. When the iris is closed, “CL” is displayed in the window. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 111: Operation Panel In Use With Hd Equipment
CCU/CNU REMOTE (camera control unit/ camera command network unit remote) connector (8-pin) Connect to the RCP/CNU connector of CCU or the MSU connector of CNU. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 112: Msu-750, Master Setup Unit
Press and light up this button to turn the power supply to the viewfinder ON. When you press the button again, it goes dark and the power supply is turned off. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 113 Press the button again to make it go CHARACTER connector of the CNU-700. The dark. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 114 When the EXPAND button is lit, interrupted, they will flash in red. numbers 13 through 24 are displayed and cameras 13 through 24 are selected. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 115 (it means that the data is being read from or written to the card). This may erase data stored in the card. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 116 To disable only the iris/ master is resumed. black control block of the panel, press this button so that it goes dark. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 117 When both the red and green tally signals are simultaneously sent, the left half of the background lights in red and the right half lights in green. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 118: Rcp-750/751, Remote Control Panel
COARSE Iris/master black control block AUTO IRIS/MB ACTIVE 7 ALARM indicator ALARM CALL 8 CALL button PANEL 9 PANEL ACTIVE button ACTIVE IRIS REMOTE CONTROL PANEL HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 119 If the BARS button is lit, press the button present. to turn it dark before pressing the TEST button. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 120 Memory Stick media card in this condition, the data displayed to permit you to adjust the displayed are not guaranteed. All the data may be lost. items. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 121: Iris/Master Black Control Block (Rcp-750)
Displays the f-number of the current iris setting. When the iris is closed, “CL” is displayed. f EXT (lens extender) indicator Lights when the lens extender is used. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 122: Iris/Master Black Control Block (Rcp-751)
Absolute mode. When the control. IRIS/MB ACTIVE button is not lit, Relative mode is automatically selected and this button is not operative. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 123: Connector Panel
Caution When installing this panel, provide a gap of 7 cm (3 inches) or more behind the connector panel to prevent damage to cables. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 124: Rcp-700/701, Remote Control Panel
To stop it flashing, control the camera system (Panel active status). The IRIS/MB ACTIVE button also illuminates. press the button again. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 125 When the red and green tally signals are sent simultaneously, the left half of the HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 126 Connect to the RCP/CNU connector of a CCU- 700A/700AP, the RCP connector of a CNU-700 or the AUX connector of another RCP Series Remote Control Panel. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 127: Rm-B150, Hand-Held Remote Control Unit
S-EVS value is adjusted with the mode, the shutter speed is adjusted with the menu select knob (rotary encoder). menu select knob (rotary encoder). HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 128 Configuration menu to change the function that the AWB button are both disabled. When the is turned on/off with this button adjustment mode of the WHITE controls is HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 129 F FWD standard state. If the button is pressed while illuminated, the camera reverts to the state before the button was illuminated. STOP PLAY REC REVIEW HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 130: Connector Panel
Selects the RM Configuration menu. When this Connect to a color monitor to observe the signal from switch is pushed in the V direction, the ‘Basic the camera. menu’ is selected. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 131 Push the RM Configuration switch in the v direction. Notes • If an operation has not been made in Menu mode after one minute, the menu automatically exits. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 132: Rm-B750, Hand-Held Remote Control Unit
ACTIVE indicator stays lit. BARS: To send a color bar signal LOCK mode: All controls from this unit are disabled (lock status). Both this button and the IRIS/MB HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 133 With the MONITOR button unlit, the disabled depending on the combination of camera Maintenance menu of this unit appears on the and VTR. For details, ask your Sony dealer. LCD when you press and light this button. With the MONITOR button lit, the unit enters...
Page 134: Connector Panel
3 WHITE controls BLACK 4 BLACK controls A AWB (auto white balance) button Press to automatically adjust the white balance. The button lights during adjustment and goes HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 135: Hdvf-20A, Hd Electronic Viewfinder
Diopter adjustment ring Adjusts the contrast of the screen. This control has no Allows for optimal focus adjustment. effect on the output signals of the camera. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 136: Hdvf-700A, Hd Electronic Viewfinder
Red tally lamps 5 POWER switch indicator Front Rear qf External tally lamp qg External tally dimmer control Bottom qh CAMERA connector qj Mounting wedge HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 137 For details, refer to the manual for the camera. m Red tally lamps Light up when the camera receives a red tally signal. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 138: Hdvf-C700W/C750W, Hd Electronic Viewfinder
CONTRAST control the manual for the camera being used. Adjusts the picture contrast. c Red tally lamps Light up when the camera receives a red tally signal. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 139 To attach the viewfinder to a camera, the mounting wedge is inserted into the V-shaped groove on the top of the camera. *1 These controls have no effect on the camera’s video output signals. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 140: Ca-905L, Large Lens Adaptor
CAMERA connector on the CCU. g Number plate holder Fit the supplied number plates. h Accessory bracket Attach an optional accessory, such as a BKP-7911/ 7912 Script Holder. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 141: Camera-Mounting Section (Inner Base) And The Optional Bkp-9057
930 can be assigned to this switch. while pushing the safety lever (on the left) rightward. j Camera mount Fit the camera. Slide to the front and rear. HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls...
Page 142: Chapter 8 Connectors And Cables
Chapter 8 Connectors and Cables Connectors and Cables...
Page 143: Hdc-900/950/930 And Hkc-T950, Hd Color Video Camera And Hd Ccd Black Adaptor
8-1. HDC-900/950/930 and HKC-T950, HD Color Video Camera and HD CCD Black Adaptor 8-1-1 Connector Input/Output Signals HDC-900 Connector Layout 43 9 qk7 8 5 qf qs qd HDC-950/930 Connector Layout qf 5 HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 144 PROMPTER OUT signal becomes effective when the camera (External view) is connected to the CCU. GENLOCK IN and RET IN signals become effective when the camera is used alone. Signal Specifications — GND for POWER No connection HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 145 AUDIO IN CH1/CH2 (3P FEMALE) — GND for DC (+) No connection No connection DC (+) +10.5 to 17 V dc n VTR (26P MALE) (HDC-900) (External view) Signal Specifications AUDIO (G) — –60 dBu, –50 dBu, –40 dBu, -30 dBu, –20 dBu,...
Page 146 RET VIDEO GND — GND for RET VIDEO (0 dBu = 0.775 Vrms) AUDIO –6 dBu, 750 Ohms/ o LENS (36P FEMALE) (HDC-900)) 1 kHz RX COMMAND (X) RS-422 RX COMMAND (X) TX COMMAND (X) OUT RS-422 TX COMMAND (Y) OUT (0 dBu = 0.775 Vrms)
Page 147 : 2 V ENG/PRD ENG : GND (LENS TX) PRD : High impedance INCOM 2 10 kOhms p VF (25P FEMALE) (HDC-900) ENG/PROD ENG : GND PRD : High impedance INCOM MIC 1 10 kOhms ON : GND OFF : High impedance...
Page 148 GND for Y VIDEO High impedance PROMPTER (X) OUT 1.0 V p-p, Zo = 75 balanced Ohms TRK T (G) — GND for TRACKER PROMPTER (G) — GND for PROMPTER HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 149 OUT ON : 5 V selectable OFF : GND AUDIO (Y) High impedance, No connection Balanced UNREG — GND for UNREG (0 dBu = 0.775 Vrms) UNREG OUT +10.5 V to +17 V HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 150 — GND for INCOM/ B VIDEO (X) OUT 95 mV p-p, Zo = 75 MIC, Ohms (100 %) CHU F, IRIS CONT B VIDEO (G) — GND for B VIDEO HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 151: Wiring Diagrams For Cables
OUT 150 mV p-p Posi- tive pulse 8-1-2 Wiring Diagrams for Cables CCA-5 Cable Black White Orange White Brown White Brown Brown 8-pin connector (Male) 8-pin connector (Male) (Wiring side) (Wiring side) HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 152: Connection Connectors/Cables
*1 Use of the REMOTE cable enables the operator to monitor video signals. *2 If using a cable of length different from that of a standard length, contact your local Sony Sales Office/Service Center. *3 Only for HKC-T950. HDC-900/950/930 Series Product Information Manual...
Page 153: Hdcu-900, Hd Camera Control Unit
R : 0.7 V, 75 Ohms INCOM VBS OUT (1-2): BNC 1.0 V p-p, 75 Ohms DIGITAL AUDIO (AES/EBU) PIX OUT: BNC CAMERA COMMAND 1.0 V p-p, 75 Ohms PROMPTER HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 154: Audio Output Ch-1/Ch-2 (Xlr 3-Pin, Male)
REMOTE SYNC : 5 V dc 20 dB BOTH OUT BOTH : 0 V dc CH-1-ON OUT CH-1 ON : 0 V dc CH-2-ON OUT CH-2 ON : 0 V dc HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 155: Trunk Line (D-Sub 9-Pin, Female)
OUT1 0/+5 V (1 kOhms) OUT2 0/+5 V (1 kOhms) *6 Stair Case signa OUT3 0/+5 V (1 kOhms) OUT4 0/+5 V (1 kOhms) OUT5 0/+5 V (1 kOhms) OUT6 0/+5 V (1 kOhms) HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 156: Rcp/Cnu (8-Pin, Female)
B-B cable assembly WF OUT PIX OUT (1.5 m, optional) SYNC OUT WF OUT SYNC OUT CHARACTER HKCU-902 DIGITAL AUDIO RET INPUT (1-4) PROMPTER IN Y/G OUTPUT (1-2) PB/B OUTPUT (1-2) HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 157: Hdcu-950, Hd Camera Control Unit
1125 digital signal WF OUT: BNC HD SDI OUT (1 to 2): BNC 1.0 V p-p, 75 Ohms Conforms to BTA-S004B, 0.8 V p-p, 75 Ohms, 1.485 SYNC OUT: BNC Gbps/1.4835 Gbps HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 158: Camera Connector (Optical/Electrical Composite Connector)
RECALL4 (SEQ) LOW ACTIVE CHU MIC CONT2 Refer to the below No connection column. No connection AMP CONT1 Refer to the below RECALL5 (ENC) LOW ACTIVE column. RECALL6 (R+B) LOW ACTIVE HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 159: Intercom/Tally/Pgm (D-Sub 25-Pin, Female)
PIX OUT WF OUT SEQ CONT OUT (G) OPEN COLLECTOR SYNC OUT +(PNP)/_(NPN) (Selectable with COP1/ PROMPTER IN SEQ CONT OUT (X) VDA board) HKCU-951 STAIR CASE OUT (X) Y/G OUT HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 160: Cnu-700, Camera Command Network Unit
TRANSMITTED DATA 7PIN . . NOT USED TXD (-) OUT TRANSMITTED DATA SIGNAL GND SIGNAL GND RXD (-) IN RECEIVED DATA RTS OUT REQUEST TO SEND CTS IN CLEAR TO SEND HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 161: Cable Wiring
DTR OUT DATA TERMINAL READY POWER (–) SIGNAL GND SIGNAL GND SPARE DSR IN DATA SET READY CHASSIS GND CHASSIS GND RTS OUT REQUEST TO SEND CTS OUT CLEAR TO SEND HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 162: Cable Wiring
Connect to an AC power source using the supplied AC power cord. The power cord can be fixed to this unit d AUX REMOTE (auxiliary remote) connector (8- using the supplied plug holder. pin) HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 163: Remote (8-Pin, Female)
No connection EXT I/O-01 INPUT/OUTPUT PORT EXT I/O-04 INPUT/OUTPUT PORT EXT I/O-07 INPUT/OUTPUT PORT EXT I/O-12 INPUT/OUTPUT PORT EXT I/O-15 INPUT/OUTPUT PORT EXT I/O-20 INPUT/OUTPUT PORT EXT I/O-23 INPUT/OUTPUT PORT HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 164: Cable Wiring
The power cord can be fixed to this unit pin) using an optional plug retainer. Connect to the RCP/CNU connector of the CCU or the MSU connector of the CNU. HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 165: Rcp-750/751, Remote Control Panel
(CMOS LEVEL 3.3 HI ACTIVE) PORT 3 Assignable SPARE I/O (CMOS LEVEL 3.3 HI ACTIVE) PORT 4 Assignable SPARE I/O (CMOS LEVEL 3.3 HI ACTIVE) PORT 5 Assignable POWER OUT +5V DC — HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 166: Hdvf-20A, Hd Electronic Viewfinder
ON: GND +12 V IN +10.5 to +20 V OFF: +5 V S-DATA TTL level R TALLY ON: +5 V OFF: 0 V EFFECT ON: +5 V OFF: 0 V HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 167: Hdvf-C700W, Hd Electronic Viewfinder
No connection No connection G TALLY ON : +5 V OFF : GND PEAKING VF to CAM (Zi = 1 kOhms) CTL ON: +5 V OFF: GND No connection No connection HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 168: Vcs-700, Video Selector
LOE (ON) TX GND GNE for TX — POWER (+) NOT USED POWER (–) NOT USED SPARE — CHASSIS GND CHASSIS GND — SIGNAL GND FRAME GND HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 169: Ca-905L, Large Lens Adaptor
ON: L LAUX1 OUT LENS AUX OFF: High impedance (SERIAL RXD) (LENS SERIAL DATA) LENS ADRS A LAUX1 LENS AUX LENS ADRS B (SERIAL TXD) (LENS SERIAL DATA) LENS ADRS C HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 170: Vf (20P, Male) (Bkp-9057)
(COMP/VBS SW IN/OUT) No connection (External view) No connection G TALLY H: Indicator lights L: Indicator goes out PEAKING OFF Y (X) 1 V p-p, VF: Zi = 1.5 kOhms HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 171 VIDEO VIDEO (X) OUT V = 0.7 Vp-p, Zo = 75 Ohms VIDEO GND — GND for P VIDEO VIDEO (X) OUT V = 0.7 Vp-p, Zo = 75 Ohms HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables...
Page 172: Chapter 9 Glossary - Terms And Definitions
Chapter 9 Glossary – Terms and Definitions Glossary – Terms and Definitions...
Page 173: Hardware
4:3 even though sometimes shot with 16:9 cameras. more lustrous when used in combination with the Skin Sony video cameras for broadcasting and professional Tone DTL. use provide the aspect ratio conversion function in combination with a digital filter.
Page 174 (that means 96 matrix coefficients are applies. needed). However, the number of coefficients can be reduced to two for each axis in most of Sony’s cameras using some dedicated software - color phase and Knee correction saturation.
Page 175: Software
The data is also the target value for “level auto set up” including not only the analog control data but also the digital file data for switch settings. HDC-900/950/930 Series Product Information Manual Chapter 9 Glossary – Terms and Definitions...
Page 176: Camera Characteristics
S/N, which vary between different manufacturers and even - different models from the same manufacturer. Of course, users also have different tastes. S/N is also changed by HDC-900/950/930 Series Product Information Manual Chapter 9 Glossary – Terms and Definitions...
Page 177: Chapter 10 Specifications
Chapter 10 Specifications Specifications...
Page 178: Hdc-900, Hd Color Video Camera
10-1. HDC-900, HD Color Video Camera General For MIC: Operating temperature –20°C to +45°C (–4°F to –60 dBs (may be 113°F) selected to –20 dBs by Storage temperature –20°C to +50°C (–4°F to viewfinder menu or 122°F) HDCU-900 operations), Mass Approx.
Page 179: Hdc-950, Hd Color Video Camera
89.9% reflectivity) 45 +10, –5% (27.5 MHz) Minimum illumination 10 lux (F 1.4, +12 dB gain Geometric distortion Negligible (not including lens distortion) Image signal-to-noise ratio 54 dB or more (typical) HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 180: Hdc-930, Hd Color Video Camera
5.1 kg (112 lb 7 oz) Sensitivity F10.0 (at 2000 lx with Dimensions See below 89.9% reflectivity) (Unit: mm/inches) Minimum illumination 10 lux (F 1.4, +12 dB gain Imager Image signal-to-noise ratio 54 dB or more (typical) HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 181 Laser Diode Properties Maintenance manual CD-ROM version Material: InGaAsP Design and specifications are subject to change without Wave length: 1310 ±40 nm notice. Dimensions Unit: mm (inches) 133 (5 1/4) 348 (13 3/4) HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 182: Hdcu-900, Hd Camera Control Unit
DAC1-J10 recommended) Output connectors MIC OUT XLR 3-pin, male (2), 0 dBs/ –20 dBs DIGITAL AUDIO OUT BNC type (1), AES/EBU format CHARACTER OUT BNC type (1), 525/625 black and white HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 183: Hdcu-950, Hd Camera Control Unit
270 Mbps MONI (HD SDI) BNC type (1), 0.8 Vp-p, 75 AC IN 100 to 240 V AC ohms, 1.485 Gbps/1.4835 RET 1/2/3 BNC type (3), Gbps VBS: 1.0 Vp-p, 75 ohms HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 184 Operation manual (1) Installation and maintenance manual (1) Dimensions Unit: mm (inches) POWER CABLE ALRAM OPEN MAIN SHORT INCOM PROD PRIV HD CAMERA CONTROL UNIT 200 (7 7/8) 5 (7/32) 9 (3/8) HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 185: Cnu-700, Camera Command Network Unit
(VBS), 75 ohms For other countries: 1.0 Vp- WF 1to WF 6 INPUT BNC type (6), p (VBS)/ 0.7 Vp-p (V), 75 For USA and Canada: 1.0 ohms Vp-p (VBS)/0.714 Vp-p (V), 75 ohms HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 186: Msu-700A, Master Setup Unit
Remote cable CCA-5-3 (3 m) inches) Remote cable CCA-5-10 (10 m) Mass RCP-750: 1.5 kg (3 lb 5 oz) Remote cable CCA-5-30 (30 m) RCP-751: 1.3 kg (2 lb 14 Maintenance Manual Memory Stick HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 187: Rcp-700/701, Remote Control Panel
24PsF 27kHz 48Hz 8262-538-A) 1080 25PsF 28.13kHz 50Hz Lens assembly (standard magnification with special 1080 29.97PsF 33.72kHz 59.94Hz compensation for aberrations) (Part No. A-8267- 737-A) 1080 30PsF 33.75kHz 60Hz 1080 28.13kHz 50Hz HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 188: Hdvf-700A, Hd Electronic Viewfinder
1080 30PsF 33.75kHz 60Hz Optional accessories 1080 28.13kHz 50Hz VFH-770 Outdoor Hood 1080 59.94i 33.72kHz 59.94Hz 1080 33.75kHz 60Hz External dimensions Unit: mm(inches) 265 (10 1/2) 362 (14 3/8) 300 (11 7/8) HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 189: Hdvf-C700W/C750W, Hd Electronic Viewfinder
Optional accessories VHF-770 Outdoor Hood 1080 30PsF 33.75kHz 60Hz 1080 28.13kHz 50Hz External dimensions Unit: mm(inches) HDVF-C750W: 259 (10 1/4) 216 (8 5/8) HDVF-C700W: 260 (10 1/4) 314 (12 3/8) 258 (10 1/4) HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 190: Hkc-T950, Hd Ccd Block Adaptor
Rear-panel sticker (1) Optional accessories BVF-77/77CE 7-type monochrome viewfinder HDVF-700A 7-type monochrome viewfinder BVF-7700/7700P 7-type color viewfinder (Only when the CCU-900/900P is used) HDVF-C750W/C700W 6-type color LCD viewfinder BVF-55/55CE 5-type monochrome viewfinder HDC-900/950/930 Series Product Information Manual Chapter 10 Specifications...
Page 191: Appendix
Appendix Appendix...
Page 192: Function Comparison Chart - Paint
Gate# (on/off) Skin Dtl#(cach channel) (on/off) SkinDetail (all channels) (on/off) Gamma R,G,B, Master Gamma 0.40, 0.45, 0.50 Gamma Off Black Gamma R,G,B, Master Low/L Mid/H Mid/High Range Black Gamma (on/off) Low/L Mid/H Mid/High Range HDC-900/950/930 Series Product Information Manual Appendix...
Page 193 Shutter (on/off) ECS (on/off) S-EVS (on/off) Note MSU: V1.20 RCP: V1.01 RM-B750: V1.00 *1 Available w/VTR function SW (selectable when in the ENG Mode in the menu) *2 Available w/Black knob (selected from the menu) HDC-900/950/930 Series Product Information Manual Appendix...
Page 194: Function Comparison Chart - File
Auto White Lens Select Select File Change Name Adjusting (Lens Adjusting Items) OHB File OHB Store Auto W.Shading Auto B. Shading Auto White Auto Black Adjusting Black Shading White Shading Black Set OHB Matrix HDC-900/950/930 Series Product Information Manual Appendix...
Page 195: Function Comparison Chart - Maintenance
Skin Detail 1, 2, 3 Auto W. Shading Auto B. Shading Lens Adjusting Flare R, G, B V Mod Saw R,G,B, Master D Shad Comp (on/ off) V Mod Saw Off Auto Iris Pattern HDC-900/950/930 Series Product Information Manual Appendix...
Page 196 (SD) W.Limiter (SD) B. Limiter (HD) Detail Off (SD) Detail off Crs Col Crs Col Reduce Reduce (on/off) Coring Level Comb Aspect Aspect Select 16:9 Squeeze Letter Box 4:3 Crop Letter size Crop Posi HDC-900/950/930 Series Product Information Manual Appendix...
Page 197: Function Comparison Chart - Configuration
Level Adjusting LED Disp Level Bright MSU SW PIX/WF Syncro(on/off) Set 1/2 PIX/WF All Mode (on/off) PIX/WF Control Mode Screen Saver TestSW Mode (Saw, 3step, 10step) Extended Call Mode Shutter Angle Mode (on/ off) HDC-900/950/930 Series Product Information Manual Appendix...
Page 198 Relative 1/2, Relative 1/4 Absolute, Relative 1/1, Master Black Relative 1/2, Relative 1/4 Absolute, >Min, >Max, Iris Relative 1/1, Relative 1/2, Relative 1/4 WF/PIX R,G,B, RGB, SEQ, ENC Note Italic: Accessible only when in the ENG Mode HDC-900/950/930 Series Product Information Manual Appendix...
Page 199: Function Comparison Chart - Function
Level Dep Off Chroma Off SD Detail Off SD Matrix Off White Select White Preset Memory A Memory B Note *1 Available w/VTR function SW (selectable when in the ENG Mode in the menu) HDC-900/950/930 Series Product Information Manual Appendix...
Page 200: Function Comparison Chart - Multi, Card
Direct Menu Menu Menu Menu Button Button Button Button Multi-Control Menu Master/Slave Master Slave All Slave All Off Character Character on Default System Auto Diag/One Cam Data/One Cam IC Memory Card Menu Card Initialize HDC-900/950/930 Series Product Information Manual Appendix...
Page 201: Function Comparison Chart - Button And Knob
WAVEFORM MONITOR Camera Select PANEL ACTIVE PARA EXPAND MASTER SLAVE Filter control FILTER CTRL ECS/Shutter select Gamma select Master gain select IRIS/MB ACTIVE MASTER BLACK control knob MASTER BLACK RELATIVE Iris Control knob *1&*4 CALL HDC-900/950/930 Series Product Information Manual Appendix...
Page 202 *1 Available w/VTR function SW (selectable when in the ENG Mode in the menu) *2 Available w/Black knob (selected from the menu) *3 Available w/Menu Mode buttons by pressing the MONITOR button *4 Accessible only with switches or knobs on the control panel HDC-900/950/930 Series Product Information Manual Appendix...

This manual is also suitable for:

Hdc-950 series Hdc-930 series

Sony HDC-900 Series Product Information Manual

Chapter 1 Introduction

Overview

Advanced Digital Signal Processing (ADSP)

Sony Design Criteria

Features of the HDC-900/950/930

Features of the System Components

Chapter 2 Total System

System Configuration

Camera Head

Camera Control Unit

Control System

Viewfinders

Optional Accessories

System Setup

Rack Mounting of System Equipment

Chapter 3 Benefit of Sony ADSP (Advanced Digital Signal Processing)

Full DSP Camera Processing

Precise Handling of Highlight Position

Outstanding Reliability and Easy Maintenance

Low Power Consumption

Chapter 4 Control System

Sony Camera Command Network System

Master Set-Up Unit - MSU-700A/7

Camera Command Network Units - CNU-700 and CNU-500

New Remote Control Panels - RCP-750/751

Auto Set-Up

Control Priority and Parallel Mode

S-BUS Control

Chapter 5 Optical Fiber Connector and Cable

Optical Fiber Overview

Cleaning of the Connector and Cable

Chapter 6 A Quick Lesson on Camera Settings

Case 1 - for Situations Requiring Minimal Camera Operator Experience

Case 2 - for General Operations

Initial Settings for the Control System

File Structure

Chapter 7 Location and Function of Parts and Controls

HDC-900, HD Color Video Camera

HDC-950/930, HD Color Video Camera

HDCU-900, HD Camera Control Unit

HDCU-950, HD Camera Control Unit

CNU-700, Camera Command Network Unit

CNU-500, Camera Command Network Unit

VCS-700, Video Selector

MSU-700A, Master Setup Unit

MSU-750, Master Setup Unit

RCP-750/751, Remote Control Panel

RCP-700/701, Remote Control Panel

RM-B150, Hand-Held Remote Control Unit

RM-B750, Hand-Held Remote Control Unit

HDVF-20A, HD Electronic Viewfinder

HDVF-700A, HD Electronic Viewfinder

HDVF-C700W/C750W, HD Electronic Viewfinder

CA-905L, Large Lens Adaptor

Chapter 8 Connectors and Cables

HDC-900/950/930 and HKC-T950, HD Color Video Camera and HD CCD Black Adaptor

HDCU-900, HD Camera Control Unit

HDCU-950, HD Camera Control Unit

CNU-700, Camera Command Network Unit

CNU-500, Camera Command Network Unit

MSU-700A, Master Setup Unit

MSU-750, Master Setup Unit

RCP-750/751, Remote Control Panel

HDVF-20A, HD Electronic Viewfinder

HDVF-700A, HD Electronic Viewfinder

HDVF-C700W, HD Electronic Viewfinder

HDVF-C750W, HD Electronic Viewfinder

VCS-700, Video Selector

CA-905L, Large Lens Adaptor

Chapter 9 Glossary - Terms and Definitions

Hardware

Software

Camera Characteristics

Chapter 10 Specifications

HDC-900, HD Color Video Camera

HDC-950, HD Color Video Camera

HDC-930, HD Color Video Camera

HDCU-900, HD Camera Control Unit

HDCU-950, HD Camera Control Unit