Rep 4.4.3 Fuser Thermostat - Xerox DocuPrint P1202 Service Manual

REP 4.4.3 Fuser Thermostat

Removal
1 Switch the printer power off and disconnect the AC power cord.
2 Remove the Printer Cartridge (REP 4.5.1).
3 Remove the System Controller PWB (REP 4.6.2).
4 Remove the Control Panel Harness Cover (REP 4.1.2).
5 Disconnect the Control Panel Harness from J1 on the Control Panel.
6 Remove the Main Cover (REP 4.1.3).
7 Remove the Fuser Assembly (REP 4.4.1).
8 Remove the two screws that secure the Thermostat to the Fuser Assembly (Figure 4.4.3a)
Replacement
1 Assemble in reverse order.
2 Verify proper operation.
Xerox DocuPrint P1202 Service Manual
Figure 4.4.3a. Fuser Thermistor Removal.
3/99
www.printcopy.info
4-27
egl_349a
Repair Procedures