Xerox DocuPrint P1202 Service Manual page 83

5 Disconnect connectors J3 and J4 from the System Controller PWB (Figure 4.6.2.b).
6 Remove the three screws that secure the System Controller PWB to the rear of the printer
(Figure 4.6.2b).
7 Slide the System Controller out the rear of the printer (Figure 4.6.2b).
8 If an Optional Serial PWB is installed and the System Controller PWB is being replaced, remove
the Optional Serial PWB and install it on the new System Controller PWB.
Replacement
1 Assemble in reverse order.
2 Verify proper operation.
Xerox DocuPrint P1202 Service Manual
Figure 4.6.2b System Controller Removal.
egl_311a
3/99
www.printcopy.info
4-41
egl_313
Repair Procedures