Xerox DocuPrint P1202 Service Manual page 106

5.3.3.6 PCL5e Tab
.
sm5_006
egl_431a
The PCL5e tab (shown above) enables the following printer settings:
Typeface allows you to select the desired typeface. This setting is ignored when the software application
specifies a font.
Symbol determines the symbol set. A symbol set is a set of alphabetic and numeric characters, punctua-
tion, and special symbols used wen printing with a selected font.
Pitch set s the font pitch (only if you have selected a scalable monospaced font). Pitch refers to the num-
ber of fixed-space characters in a horizontal inch of type.
Point Size sets the font point size (only if you have selected a scalable typographic font). Point size refers
to the height of the characters in the font. One point equals approximately 1/72 of an inch. You can select
point sizes from1 to 1008 in increments of 0.25 points.
Lines Per Page sets the number of lines that print on each page. The setting can range from 1 to 225 lines
per page.
Courier determines the courier font type: Regular or Dark.
Font List prints the font list showing all the fonts available for PCL emulation.
3/99
www.printcopy.info
General Procedures and Information 5-18 Xerox DocuPrint P1202 Service Manual