Xerox DocuPrint P1202 Service Manual page 64

9 Remove the Exit Sensor Actuator (Figure 4.4.1c).
CAUTION The Exit Sensor Actuator is located on the bottom of the Fuser near the printer's AC
input wires. Ensure that the actuator is not damaged as the Fuser is removed.
10 Disconnect the harnesses from CN102 and CN4 on the Printer Engine PWB (Figure 4.4.1c).
Figure 4.4.1c Exit Actuator Removal
Exit Actuator
egl_346a
3/99
www.printcopy.info
Repair Procedures 4-22 Xerox DocuPrint P1202 Service Manual