Xerox DocuPrint P1202 Service Manual page 103

5.3.3.3 Job Tab
sm5_004
egl_430a
The Job tab (shown above) enables the following printer settings:
Timeout determines the amount of time (in seconds) the printer will wait before printing the last page of
a print job that does not end with a command to print the page or a formfeed character.
Paper Type provides the printer with information about the type of paper to be used for a print job. If you
2
use paper with a weight of more than 42lb. (90 g/m ), or an envelope, set this to THICK and use the
MSF's manual feed slot.
Density determines the overall density of the printed image.
Memory Enhancement mode makes the printer process more data by optimizing the memory. When
set to ON , the complex data can be processed.
Resolution Enhancement mode makes the printer optimize the print quality to 1200 dpi image quality.
3/99
www.printcopy.info
Xerox DocuPrint P1202 Service Manual 5-15 General Procedures and Information