Rep 4.5.5 Dc Fan Motor - Xerox DocuPrint P1202 Service Manual

REP 4.5.5 DC Fan Motor

Removal
1 Disconnect the AC Power Cord and remove the Paper Tray.
2 Remove the Printer Cartridge (REP 4.5.1).
3 Remove the System Controller PWB (REP 4.6.2).
4 Remove the Control Panel Harness Cover (REP 4.1.2).
5 Disconnect the Control Panel Harness from J1 on the Control Panel.
6 Remove the Main Cover (REP 4.1.3).
7 Disconnect the DC Fan from CN2 on the Motor Drive PWB.
8 Remove the DC Fan Motor (Figure 4.5.5a).
Replacement
1 Assemble in reverse order.
2 Verify proper operation.
Repair Procedures
Figure 4.5.5a. DC Fan Motor Removal.
3/99
www.printcopy.info
4-34
egl_338a
Xerox DocuPrint P1202 Service Manual