Xerox DocuPrint P1202 Service Manual page 104

5.3.3.4 Interface Tab
.
sm5_005
egl_429a
The Interface tab (shown above) enables the following printer settings:
Baud rate sets the rate at which data is being sent to or from the computer.
Robust XON sets XON/XOFF pacing (if the handshaking protocol uses XON/XOFF pacing). When set
to ON , the printer send a continuous stream of XONs to the host computer to indicate that the serial port
is ready to receive more data. An XON is sent every second as long as no data is received across the
serial port in the last second, the last XON is accepted by the host computer, and the printer is ready to
receive data from the serial port.
3/99
www.printcopy.info
General Procedures and Information 5-16 Xerox DocuPrint P1202 Service Manual