Topcon GTS-600 Series Instruction Manual page 80

The angle option can be selected from any option [F2] -
[F5].
[F2] (DIST) - - Once the rod person is online with the
instrument, the distance to set the layout point can be
accomplished. The (HD) is the actual measured distance.
The (dHD) is the amount of distance the rod person must
move to be on the point. The distance measurement default
is in the fine repeat mode.
[F3] (F/C) - - The [F3] key allows the instrument person to
change the distance measurement mode from the coarse
repeat mode to the fine repeat mode. Pressing the key
once will change the mode. The vertical distance is only
shown on the display in the fine repeat mode. Pressing [F3]
a second time will change the distance measurement mode
back to coarse repeat mode.
[F4] (NEZ) - - This option allows the instrument person to
measure the coordinates after laying out the point.
[F5] (GUIDE) - - The guide option has distance features for
the instrument person, to pass along instructions to the rod
person, to layout the point. One option shows the distance
to either move (BACK) towards the instrument or (GO)
away from the instrument and (RIGHT) or (LEFT) distance
to move onto the layout point in case the rod person might
have strayed offline.
The cut or fill information is also shown on the display. This
allows the instrument person to see the amount of dirt to
cut or fill using the previous rod height.Refer to the Guide
Option of this chapter for detailed instructions.
[F6] (NEXT) - - The (NEXT) option allows the instrument
person to continue to layout another point.
(Coarse Repeat Screen)
HD*
dHD = -52°10'15"
ANG DIST F/C
[F1] [F2] [F3]
HD*
dHD :
dz :
ANG DIST F/C
[F1] [F2] [F3]
N *
E :
Z :
ANG DIST F/C
[F1] [F2] [F3]
→ RIGHT
↑ GO
↑ UP
ANG DIST F/C
[F1] [F2] [F3]
Setting Layout Point
PT#:
ANG DIST F/C
[F1] [F2] [F3]
4-36
4 PROGRAM MODE
< m
NEZ GUIDE NEXT
[F4] [F5] [F6]
(Fine Repeat Screen)
< m
m
m
NEZ GUIDE NEXT
[F4] [F5] [F6]
0.002 m
-0.001 m
0.001 m
NEZ GUIDE NEXT
[F4] [F5] [F6]
1.448 m
0.923 m
1.234 m
NEZ GUIDE NEXT
[F4] [F5] [F6]
NEZ GUIDE NEXT
[F4] [F5] [F6]