Main Menu Contains - Topcon GTS-600 Series Instruction Manual

2.5 Main Menu Contains

The main menu contains as following items.
Select the menu by pressing soft keys ([F1]~[F6]).
Prog
Std Mem
STANDARD MEASUREMENT MODE
This mode is used for follows
(see Chapter 3 "STANDARD MEASUREMENT MODE" .)
PROGRAM MODE ( APPLICATION MEASUREMENT)
This mode is used for follows.
1. Setting a direction angle for horizontal orientation (BS)
2. Retaining a Coordinate (STORE-NEZ)
3. Remote elevation measurement (REM)
4. Missing line measurement (MLM)
5. Repetition angle measurement (REP)
6. Layout (LAYOUT)
7. Line measurement (LINE)
8. Application software Loader option.(LOADER)
(see Chapter 4 "PROGRAM MODE" .)
2001-07-10 15:30:40
Com Para
Adj
PARAMETERS SETTING MODE
The PARAMETERS SETTING MODE settled
is memorized even power is off.
(see Chapter 7 "PARAMETERS SETTING
MODE" .)
ADJUSTMENT MODE
This mode is used for checking and adjustment.
Adjustment of compensation systematic errors of
instrument
Showing compensation values of systematic errors of
instrument
Setting Date & Time
Setting instrument constant value
(see Chapter 8 "CHECK AND ADJUSTMENT" .)
COMMUNICATION MODE
This mode is used for follows
Setting of PROTOCOL
Data file in/out
(see Chapter 6 "COMMUNICATION MODE" .)
MEMORY MANAGE MODE
This mode is used for follows
Displaying file memory status
Protecting/Erasing/Renaming
Initializing a file.
(see Chapter 5 "MEMORY MANAGE MODE" .)
Angle measurement
Distance measurement
Coordinate measurement
2-5
2 PREPARATION FOR MEASUREMENT