Distance Measurement (Single/N-Times Measurement) - Topcon GTS-600 Series Instruction Manual

3.2.4 Distance Measurement (Single/N-times Measurement)

When presetting the number of times, the instrument measures the distance as the setting times and
the average distance will be displayed.
When presetting the number of times as 1, it does not display the average distance, because of single
measurement. It has been set at single measurement at factory.
1)Setting the number of times
Confirm the angle measurement mode.
Operating procedure
1
Press [F1](SD) or [F2](HD) key.
2
Press [F6]( ) key to get the function page as
↓
2.
3
Press [F3](MEAN) key.
4
Input the setting the number of times, and
press [ENT] key. *1)
[Example] 4 times
N-times measurement starts.
2)Measuring Method
Confirm the angle measurement mode.
Operating procedure
1
Collimate the center of the prism.
2
Select the measurement mode by pressing
[F1](SD) or [F2](HD) key.
Example:Horizontal distance
N-times measurement starts.
3 STANDARD MEASUREMENT MODE
Operation
V : 90°10'20"
HR: 120°30'40"
SD HD
[F2]
V : 90°10'20"
HR: 120°30'40"
HD:
VD:
MEAS MODE
[F6]
REC SO
[F3]
Average times
N:0
EXIT
[F4][ENT]
V : 90°10'20"
HR: 120°30'40"
HD:
VD:
REC SO
Operation
Collimate
V : 90°10'20"
HR: 120°30'40"
SD HD
V : 90°10'20"
[F2]
HR: 120°30'40"
HD:
VD:
MEAS MODE
3-5
Display
NEZ 0SET HOLD P1 ↓
PSM 0.0
PPM 0.0
(m) F.R
VH SD NEZ P1
↓
MEAN m/ft P2 ↓
BS
PSM 0.0
< PPM 0.0
(m) *F.N
MEAN m/ft P2
↓
Display
NEZ 0SET HOLD P1
↓
PSM 0.0
PPM 0.0
(m) F.N
VH SD NEZ P1 ↓