Auto Power Off - Topcon GTS-600 Series Instruction Manual

OFF
The Point Guide should be used within a distance of
100 meters (328 ft.). The quality of its results will
depend on the weather conditions and the user's
eyesight.
The goal of the rod person is to look at both LEDs
on the instrument and move the prism on-line until
both LEDs become equally bright . If the solid LED
is brighter, move to the right. If the blinking LED is
brighter, move to the left.
10.Laser Plummet ( Only for Laser Plummet type)
Laser plummet option will help you to center the instrument easily onto the measurement point.
Press the ( ∗ ) key to view the instrument options. Since there are two screens of options, press
[F6](1 ↓ ) soft key to view the next screen.
Press the [F5]key to turn on/off of laser plummet option.
Laser plummet icon will change as follows.
OFF
Symbol mark while the laser is emitting.
The following symbol mark will indicate that the laser is emitting.
V : 8 7 ° 5 5 ' 4 5 " 5
H R : 1 8 0 ° 4 4 ' 1 2 " 5
SD HD NEZ 0SET HOLD P1↓
Laser Plummet auto-cut off function
The laser plummet will be turned off automatically after 1 to 99 minutes (Default:3 minutes). It is
also possible to stop the auto-cut off function.
Refer to the next page and Chapter 7-Parameters setting mode in GTS-600 instruction manual to
change the time or to invalidate the function.

1.6 Auto Power Off

If no key operation is given for the setting time(1 to 99 minutes), the power turns off automatically.
To set the Auto Power Off function OFF/ON(1 to 99 minutes), refer to Chapter 7 " PARAMETERS
SETTING MODE".
To set the time of auto power off in parameters setting mode, after selecting [ON], input the time by
numeric key.
ON
ON
The symbol mark will blink while the laser
plummet is working
1-10
1 NOMENCLATURE AND FUNCTIONS
Instrument
Illuminate Blink
Prism