Options - Topcon GTS-600 Series Instruction Manual

4.6.1 Options

The option routines provide features for selecting jobs, job maintenance and transferring jobs to and
from the GTS-600. In the (Create or Select a job) routine, the user can scroll through memory to select
a job by pressing the soft key assigned to the job.
In the Job Manager option. the user can View Jobs in Memory, Erase Points in a Job, Create Jobs,
Transfer Jobs, Delete and Rename Jobs.
Examples are provided below for all the routines for the Options.
Create or Select a Job
In the Create or Select a Job option, all the jobs in memory are shown on the display. If there are more
than four jobs in memory, pressing the (MORE) [F6] key will page down to view other jobs. Once a job
is highlighted, press the soft key for that job to become the current job.
Operating procedure
1
From the Main Menu Icons, press the [F4]
(Options) key.
2
In the Options menu select [F1] (Create or
Selection a Job).
3
The jobs that are in memory will show on the
screen. If there are more then four jobs in
memory, the [F6] (MORE) will scroll to the
other pages.
4
To select a job, press the soft key that
represents the job. EXAMPLE; To select the
job, TAC2, press the [F3] key.
5
The LAYOUT screen appears in the back
ground with the current job information in
front.
6
Once the job information disappears from the
display, the layout menu appears on the
display and that job becomes the current job.
Operation
LAYOUT
F1 Setting Direction Angle
F2 Setting Layout Point
F3 Coordinate data
F4 Options
[F4] Options
F1
F2
[F1]
Select a Job (Job,# of Pts)
F1 TAC1
F2 TOPCON
F3 TAC2
F4 NEW
[F6]
Select a Job (Job,# of Pts)
F1 TAC1
F2 TOPCON
F3 TAC2
F4 NEW
[F3] LAYOUT
F1 Setting Direction Angle
Job Name
F2 Setting Layout Point
# of Pts
F3 Coordinate data
Grid Factor 1.000000
F4 Options
LAYOUT
F1 Setting Direction Angle
F2 Setting Layout Point
F3 Coordinate data
F4 Options
4-13
4 PROGRAM MODE
Display
Create or Select a Job
Job Manager
25 4/6
20
10
10 MORE
25 4/6
20
10
10 MORE
TAC2
10