Data File In - Topcon GTS-600 Series Instruction Manual

6.2 Data file in
You can transfer data files from a PC to the GTS-600 Series.
The file can be received into a sub-directory.
[Example] Transferring a file into [XYZ] sub-directory
Operating procedure
Make sure the instrument is ready and
waiting for the data file before you command
the PC to send the file.
1
Press [F2](Data file in) key.
2
Select a sub-directory by pressing the [F6]( ↓ )
or [F5]( ↑ ) key.
Hilight will move up or down to select a sub-
directory then press the [ENT] key. *1)
Example : Selecting [XYZ] sub-directory
3
Command the PC to send the file at this time.
Press the [F1](START) key to start
transferring.
File name, amount of received data (Byte) /
Capacity of the file (Byte) and percentage of
proceeding will be displayed.
When the transfer is complete, the display will
return to the main menu icons.
*1) To return to the main directory, select the ". ." directory and
press the [ENT] key.
To make a sub-directory, press the [F4] (MkDir) key and
enter new sub-directory name. Maximum eight letters can
be input.
See Section 2.9"How to Enter Numerals and Alphabet
Letters".
Maximum 128 sub-directories can be generated.
Operation
Communication
F1 Protocol
F2 Data file in
F3 Data file out
[F2]
ABC
XYZ
START
[F5]or [F6]
.
[ENT]
..
START
[F1]

Data file in

Make directory
Alpha
6-2
6 COMMUNICATION MODE
Display
<dir>01-04
<dir>01-04
↑ ↓
MkDir
<dir>01-04
<dir>01-04
↑ ↓
MkDir
[TOPCON .DAT]
0/ 8676 (0%)
[ ]
← →
SPC