Parameters Setting Mode; Parameter Setting Options; Parameters For Measurement And Display - Topcon GTS-600 Series Instruction Manual

7

PARAMETERS SETTING MODE

Prog Std Mem Com Adj Para
PARAMETERS SETTING MODE
In this mode, setting of parameters regard with measuring, displaying and
communications will be done.
When a parameter is changed and set, the new value is stored into memory.Press [F6]
key from the main menu icons, the following display will be shown.
The parameter modes is classified in Measurement and Communication.
Parameters
F1 Measurement
F2 Communication
F3 Password

7.1 Parameter Setting Options

7.1.1 Parameters for Measurement and Display

Menu
1.Ang. Unit
2.Min.Angle
3.Tilt
4.Err. corr.
5.V -0
6.HAmem
7.Light
2001-07-10 15:30:40
Selecting Item
Select degree(360°), gon(400G) or mil (6400M) for the
deg / gon / mil
measuring angle unit to be shown on the display .
Select the minimum display angle reading ON or OFF.
GTS-601/601AF[ OFF:1"/ ON:0.5"](0.5mgon/0.1mgon)
OFF / ON
GTS-602/602AF[ OFF:5"/ ON:1"] (1mgon/0.2mgon)
GTS-603/603AF[ OFF:5"/ ON:1"] (1mgon/0.2mgon)
GTS-605/605AF[ OFF:5"/ ON:1"] (1mgon/0.2mgon)
Select the tilt sensor option for OFF, (1axis) vertical only or
OFF / 1axis / 2axis
(2axis) vertical and horizontal.
Select the error correction ON or OFF for collimation and error
adjustment.
Note: Perform this item after complete section 8.4 .
OFF / ON
Zenith / Level Select the vertical angle reading for Zenith 0 or Horizontal 0.
It is able to retain presetting angle after turning power
off.(MEM.ON )
OFF / MEM.ON
Note: After changing this parameter, turn the power switch
Select the option to turn on the backlight when the power is
turned on.
OFF / ON
Note: Resume Mode ON/OFF option is given priority to
7 PARAMETERS SETTING MODE
[Press [F6] key.]
Contents
For more information, refer to Section 8.4"Adjustment
of Compensation Systematic Error of Instrument" and
Section 8.5"Showing Constant List and Switch ON/
OFF Compensation Systematic Error of Instrument"
off once.
regardless of the setting of this item.
7-1